Accessing Print Cross-Reference - Siemens SIMATIC VPU200 Programming Manual

8.6 Printing Cross-References
Figure 8-5 shows the menu hierarchy for accessing the print
cross-references function.
Figure 8-5 Accessing Print Cross-Reference
The Print Cross-Reference function provides the option of listing all I/O
points (X,Y, WX, and WY), control relays (C), and user word memory (K and
V) used in the ladder program. You may also request that synonyms be
printed with the cross-reference listing. The memory locations are printed
in numerical sequence in the order: X, Y, C, WX, WY, K, and V. Each type
begins a new page. The specified maximum value determines search range.
If you do not want a printout of all values, change the maximum values to
those desired to save searching time.
After pressing F5 (XREF), the chart for selecting print parameters appears
for selection of column width, baud rate, lines per page and entry of date.
Upon completion of these items, press F2 to continue. A listing of
cross-reference options then appears as shown in Figure 8-6.
SIMATIC VPU200/565 Programming Manual Printing 8-13