3.5-Inch Hard-Drive Assembly; Removing The 3.5-Inch Hard Drive - Dell OptiPlex 3080 Small Form Factor Service Manual

Steps
1. Replace the eight M3x3 screws to secure the hard drive bracket.
2. Align and insert the drive bracket with the slots on the drive.
Next steps
1. Install the 2.5 in. hard drive assembly.
2. Install the front bezel.
3. Install the side cover.
4. Follow the procedure in after working inside your computer.

3.5-inch hard-drive assembly

Removing the 3.5-inch hard drive

Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the side cover.
Field service information 27