HP HPE StoreEasy 1000 Getting Started Manual
  1. Manuals
  2. Brands
  3. HP Manuals
  4. Storage
  5. HPE StoreEasy 1000
  6. Getting started manual
HP HPE StoreEasy 1000 Getting Started Manual

HP HPE StoreEasy 1000 Getting Started Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
EAC Getting Started Guide
for HPE StoreEasy 1000 Storage
Abstract
This document provides system administrators step-by-step instructions for setting up the sixth generation
HPE StoreEasy 1000 Storage for the first time.
Part Number: P26343-001
Published: March 2020
Edition: 1

Advertisement

Table of Contents
loading

Related Manuals for HP HPE StoreEasy 1000

Summary of Contents for HP HPE StoreEasy 1000

  • Page 1 EAC Getting Started Guide for HPE StoreEasy 1000 Storage Abstract This document provides system administrators step-by-step instructions for setting up the sixth generation HPE StoreEasy 1000 Storage for the first time. Part Number: P26343-001 Published: March 2020 Edition: 1...
  • Page 2 © Copyright 2018 , 2020 Hewlett Packard Enterprise Development LP Notices The information contained herein is subject to change without notice. The only warranties for Hewlett Packard Enterprise products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty.

  • Page 3: Table Of Contents

    Setup and install........................ 7 1. Unpack HPE StoreEasy 1000 Storage................................7 2. Installing the rail kits and mounting the HPE StoreEasy 1000 Storage in a rack.............10 Installing the rail kits and mounting the system in a rack for HPE StoreEasy 1460 Storage, HPE StoreEasy 1660 Storage, HPE StoreEasy 1660 Expanded Storage, and HPE StoreEasy 1860 Storage..........................................
  • Page 4 EAC local representative information................. 43 Support and other resources..................44 Accessing Hewlett Packard Enterprise Support............................44 Accessing updates........................................44 Remote support..........................................45 Warranty information......................................... 45 Regulatory information......................................45 Documentation feedback......................................46...

  • Page 5: Introduction To Hpe Storeeasy 1000 Storage

    StoreEasy 1000 Storage delivers rich file data services and simplified management through a foundation of Microsoft Windows Storage Server and Hewlett Packard Enterprise technologies. To help organizations significantly reduce the time and the complexity of installation, each HPE StoreEasy 1000 Storage is shipped with preintegrated hardware and preloaded software.
  • Page 6 (Small Form Factor (SFF)) Q2P78B HPE StoreEasy 1860 9.6TB SAS HPE ProLiant DL380 Gen10 server Storage (Small Form Factor (SFF)) Q2P79B HPE StoreEasy 1860 14.4TB SAS HPE ProLiant DL380 Gen10 server Storage (Small Form Factor (SFF)) Introduction to HPE StoreEasy 1000 Storage...

  • Page 7: Setup And Install

    If any of the above-mentioned items are missing, contact Hewlett Packard Enterprise (https://www.hpe.com/us/en/contact-hpe.html) for assistance. IMPORTANT: For support purposes, you must know how to locate or have a copy of the HPE StoreEasy 1000 Storage serial number, the Product ID key from WSS2016 COA, and the iLO Advanced Security license key.
  • Page 8 Description Image On a label affixed outside the HPE StoreEasy 1000 Storage shipping box Top of the HPE StoreEasy 1000 Storage chassis Inside of the HPE StoreEasy 1000 Storage chassis Table Continued Setup and install...
  • Page 9 The Windows Storage Server COA label Product ID key is required when: • You have replaced the motherboard of HPE StoreEasy 1000 Storage product. • You have upgraded the original version of the Windows Storage Server operating system to a "new" release, and the new COA product ID key is required to activate the operating system.

  • Page 10: Installing The Rail Kits And Mounting The Hpe Storeeasy 1000 Storage In A Rack

    • The rail kits, when installed, form only a shelf for the HPE StoreEasy 1000 Storage to rest on. The HPE StoreEasy 1000 Storage is not attached to the rail by any other means. Use extreme caution when pulling the HPE StoreEasy 1000 Storage out from the rack.
  • Page 11 2. Slide the HPE StoreEasy 1000 Storage into the position on the rails. Figure 1: HPE StoreEasy 1000 Storage insertion into the rack 3. To secure the HPE StoreEasy 1000 Storage to the rails, the Configure-to-Order (CTO) bracket at the rear ends of the rails must overlap the chassis tab.

  • Page 12: Installing The Hpe Storeeasy 1560 Storage

    Figure 3: Secure HPE StoreEasy 1000 Storage to the rack 5. Using the holes provided in the rear rack rails, install the tie wraps and route external cables as required Figure 4: Cable management with tie wraps 6. Connect all power cords to the facility power source.

  • Page 13: Setting Up The System In Tower Mode

    Tower orientation • Rack orientation • Setting up the system in tower mode Procedure 1. Turn the system to the upright position. 2. Place the system on a flat stable surface. 3. Connect peripheral devices to the system. WARNING: To reduce the risk of electric shock or damage to the equipment: •...
  • Page 14 Procedure 1. Power down the HPE StoreEasy 1560 Storage. 2. Remove all power: a. Disconnect each power cord from the power source. b. Disconnect each power cord from the HPE StoreEasy 1560 Storage. 3. Disconnect all peripheral cables from the HPE StoreEasy 1560 Storage. 4.
  • Page 15 c. Repeat steps a–b on the other rail assembly. 2. Install the sliding rails on the tray: a. Align the notches on the rail with the pins on the side. b. Slide the rail towards the rear of the tray to lock it into place. c.
  • Page 16 4. Fasten the mounting rails to the rack columns: a. Retract and hold the rear retention bracket. b. Insert the pegs on the mounting flange into the rack holes. c. Release the rear retention bracket. d. Retract and hold the front retention bracket. e.
  • Page 17 g. Repeat steps a-f to fasten the other mounting rail. h. Make sure that both rails are mounted at the same vertical position on both sides of the rack. 5. Slide the tray into the rack. The rails will click and lock into place when the tray is properly engaged. Install the HPE StoreEasy 1560 Storage into the rack Prerequisites Before you perform this procedure, make sure that you have a T-15 Torx screwdriver available.
  • Page 18 2. Place the HPE StoreEasy 1560 Storage at the center of the server tray. Align the front panel of the HPE StoreEasy 1560 Storage with the edge of the tray. 3. Press and hold the blue rail-release tabs, and then slide the tray back into the rack. Setup and install...
  • Page 19 4. Tighten the tray thumbscrews. 5. Connect all peripheral cables and power cords to the rear panel. 6. Secure the power cord with the strain relief strap. Roll the extra length of the strap around the power input module handle. Setup and install...
  • Page 20 7. Connect each power cord to the power source. The installation is complete. Setting up the system in rack mode Procedure 1. Install the system into the rack. For more information, see the installation instructions that ship with the Tower to Rack Conversion Kit. 2.

  • Page 21: Cabling The Hpe Storeeasy 1000 Storage To The Network

    Where, 1. Network Ports 2. iLO Port If you have purchased additional interface cards for your HPE StoreEasy 1000 Storage, the following table guides you on where to install them. The numerical values indicate the order of installation. Description PCIe x8...

  • Page 22: Cabling The Hpe Storeeasy 1660 Storage And Hpe Storeeasy 1860 Storage To The Network

    Where, 1. Network Ports 2. iLO Port If you have purchased additional interface cards for your HPE StoreEasy 1000 Storage, the following table guides you on where to install them. The numerical values indicate the order of installation. Description P408i-p...
  • Page 23 Where, 1. Network Ports 2. iLO Port If you have purchased additional interface cards for your HPE StoreEasy 1000 Storage, the following table guides you on where to install them. The numerical values indicate the order of installation. Description FlexLOM...

  • Page 24: Cabling The Hpe Storeeasy 1660 Expanded Storage To The Network

    Cabling the HPE StoreEasy 1660 Expanded Storage to the network The HPE StoreEasy 1660 Expanded Storage internal cabling is pre-connected and available with the system. The following describes the external cabling for the HPE StoreEasy 1660 Expanded Storage. Front drive cage cabling •...

  • Page 25: Front Panel Cabling

    Front panel cabling Item Description Front I/O cable Front USB 2.0 cable 4. Power Up Power up the HPE StoreEasy 1000 Storage using power button on the front panel. Setup and install...

  • Page 26: Power On Initial Startup Sequence

    HPE StoreEasy 1000 Storage. 5. Power On Initial Startup Sequence You can complete the initial startup sequence by connecting HPE StoreEasy 1000 Storage using a KVM to configure a static IP or to gather the DHCP address from the start screen.
  • Page 27 Figure 9: Initial Configuration Tasks If ICT does not launch automatically, press Windows + R (run) on your keyboard, type C:\Windows \System32\oemoobe\OemOobe.exe and click OK. For more information, see Information Center for HPE StoreEasy 1000 Storage at hpe.com/storage/storeeasy-docs Setup and install...

  • Page 28: Specifications

    Specifications HPE StoreEasy 1460 Storage specifications HPE StoreEasy 1460 Storage environmental specifications Specification Value System Inlet Temperature — Operating 10°C to 35°C (50°F to 95°F) Maximum rate of change is 20°C/hr (36°F/hr). The upper limit and rate of change may be limited by the type and number of options installed.

  • Page 29: Hpe Storeeasy 1460 Storage Mechanical Specifications

    Acoustic Noise Listed are the declared A-Weighted sound power levels (LWAd) and declared average bystander position A- Weighted sound pressure levels (LpAm) when the product is operating in a 23°C ambient environment. Noise emissions were measured in accordance with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109).

  • Page 30: Hpe Storeeasy 1460 Storage Input Specifications

    Specification Value Width 70.7 cm (27.83 in) LFF Drives Height 4.29 cm (1.69 in) Depth 43.46 cm (17.11 in) Width 74.98 cm (29.5 in) SFF minimum: One drive, one processor, one power supply, 13.04 kg (28.74 lb) two heatsinks, one Smart Array controller, and five fans. SFF maximum: 10 drives, two processors, two power 16.27 kg (35.86 lb) supplies, two heatsinks, one Smart Array controller and...

  • Page 31: Hpe Storeeasy 1560 Storage Specifications

    HPE StoreEasy 1560 Storage specifications HPE StoreEasy 1560 Storage environmental specifications Specification Value System Inlet Temperature — Operating 10°C to 35°C (50°F to 95°F) Maximum rate of change is 20°C/hr (36°F/hr). The upper limit and rate of change may be limited by the type and number of options installed.

  • Page 32: Hpe Storeeasy 1560 Storage Mechanical Specifications

    Idle LWAd 4.0 Bels Entry 4.0 Bels Base LpAm 24.8 dBA Entry 24.1 dBA Base Operating LWAd 4.0 Bels Entry 4.0 Bels Perf LpAm 25.1 dBA Entry 24.1 dBA Base NOTE: Acoustics levels presented here are generated by the test configuration only. Acoustics levels will vary depending on system configuration.

  • Page 33: Hpe Storeeasy 1560 Storage Input Specifications

    HPE StoreEasy 1560 Storage input specifications Specification Value Input Requirements (per power supply) - Rated Line 100 to 120 VAC Voltage Input Requirements (per power supply) - Rated Input For 350W & 550W Power Supply: 8A (at 100~240 VAC) Input Requirements (per power supply) - Frequency 50 to 60 Hz Input Requirements (per power supply) - Rated Input For 550 W Power Supply:<...
  • Page 34 Specification Value Non-operating 5% to 95%, 38.7°C (101.7°F), maximum wet bulb temperature Altitude — Operating 3050 m (10,000 ft). This value may be limited by the type and number of options installed. Maximum allowable altitude change rate is 457 m/min (1500 ft/min). Non-operating 9144 m (30,000 ft).

  • Page 35: Hpe Storeeasy 1660 Storage Mechanical Specifications

    Hardware configurations The approved hardware configurations for this system are listed on the Hewlett Packard Enterprise website (http:// www.hpe.com/servers/ASHRAE). Emissions Classification (EMC) – Regulatory Information To view the regulatory information for your product, view the Safety and Compliance Information for System, Storage, Power, Networking, and Rack Products, available at the Hewlett Packard Enterprise Support Center: http:// www.hpe.com/support/Safety-Compliance-EnterpriseProducts Environment friendly Products and Approach (End-of-life Management and Recycling)
  • Page 36 Specification Value Power Supply Output (per power supply) - Rated Steady- For 1400W Power Supply: State Power • 1400W (at 240 VAC), • 1400W (at 240 VAC) For 800W Power Supply: • 800W (at 100 VAC), • 800W (at 240 VAC), •...

  • Page 37: Hpe Storeeasy 1660 Expanded Storage Specifications

    HPE StoreEasy 1660 Expanded Storage specifications HPE StoreEasy 1660 Expanded Storage environmental specifications Specification Value Temperature range — Operating 10°C to 35°C (50°F to 95°F) Nonoperating -30°C to 60°C (-22°F to 140°F) Relative humidity (noncondensing) — Operating 8% to 90%. 28°C (82.4°F), maximum wet bulb temperature Nonoperating 5% to 95% 38.7°C (101.7°F), maximum wet bulb temperature...

  • Page 38: Hpe Storeeasy 1860 Storage Specifications

    HPE StoreEasy 1860 Storage specifications HPE StoreEasy 1860 Storage environmental specifications Specification Value System Inlet Temperature — Operating 10°C to 35°C (50°F to 95°F) Maximum rate of change is 20°C/hr (36°F/hr). The upper limit and rate of change may be limited by the type and number of options installed.

  • Page 39: Hpe Storeeasy 1860 Storage Mechanical Specifications

    Idle LWAd 4.0 Bels Entry 4.0 Bels Base LpAm 24.8 dBA Entry 24.1 dBA Base Operating LWAd 4.0 Bels Entry 4.0 Bels Perf LpAm 25.1 dBA Entry 24.1 dBA Base NOTE: Acoustics levels presented here are generated by the test configuration only. Acoustics levels will vary depending on system configuration.

  • Page 40: Hpe Storeeasy 1860 Storage Input Specifications

    HPE StoreEasy 1860 Storage input specifications Specification Value Input Requirements (per power supply) - Rated Line 100 to 120 VAC Voltage 200 to 240 VAC BTU Rating - Maximum For 800W Power Supply: • 3207 BTU/hr (at 100 VAC), • 3071 BTU/hr (at 200 VAC), •...
  • Page 41 Specification Value Power Supply Output (per power supply) - Rated Steady- For 1400W Power Supply: State Power • 1400W (at 240 VAC), • 1400W (at 240 VAC) For 800W Power Supply: • 800W (at 100 VAC), • 800W (at 240 VAC), •...

  • Page 42: Regulatory Information For Hpe Storeeasy 1000 Storage

    Regulatory information for HPE StoreEasy 1000 Storage Product website: https://techlibrary.hpe.com/us/en/storage/info-library/index.aspx#.XhRN0kczbQU • • Intelligent Provisioning update: http://www.hpe.com/info/intelligentprovisioning/docs • Service Pack for ProLiant (SPP) update: http://www.hpe.com/servers/spp/download Regulatory information for HPE StoreEasy 1000 Storage...

  • Page 43: Eac Local Representative Information

    Notices for Eurasian Economic Union Manufacturer and Local Representative Information Manufacturer information: Hewlett Packard Enterprise, 6280 America Center Drive, San Jose, CA 95002 U.S. Local representative information Russian: • Russia ООО "Хьюлетт Паккард Энтерпрайз", Российская Федерация, 125171, г. Москва, Ленинградское шоссе, 16А, стр.3, Телефон: +7 499 403 4248 Факс: +7 499 403 4677 •...

  • Page 44: Support And Other Resources

    Support and other resources Accessing Hewlett Packard Enterprise Support • For live assistance, go to the Contact Hewlett Packard Enterprise Worldwide website: https://www.hpe.com/info/assistance • To access documentation and support services, go to the Hewlett Packard Enterprise Support Center website: https://www.hpe.com/support/hpesc Information to collect •...

  • Page 45: Remote Support

    IMPORTANT: Access to some updates might require product entitlement when accessed through the Hewlett Packard Enterprise Support Center. You must have an HPE Passport set up with relevant entitlements. Remote support Remote support is available with supported devices as part of your warranty or contractual support agreement. It provides intelligent event diagnosis, and automatic, secure submission of hardware event notifications to Hewlett Packard Enterprise, which will initiate a fast and accurate resolution based on your product's service level.

  • Page 46: Documentation Feedback

    Additional regulatory information Hewlett Packard Enterprise is committed to providing our customers with information about the chemical substances in our products as needed to comply with legal requirements such as REACH (Regulation EC No 1907/2006 of the European Parliament and the Council). A chemical information report for this product can be found at: https://www.hpe.com/info/reach For Hewlett Packard Enterprise product environmental and safety information and compliance data, including RoHS and REACH, see:...

This manual is also suitable for:

Hpe storeeasy 1460Hpe storeeasy 1560Hpe storeeasy 1660Hpe storeeasy 1860Q2r92bQ2r93b ... Show all

Table of Contents