Table of Contents
Advertisement
INDICATORS
E
6 NR Button
Used when screen noise becomes annoying. Each time this button is
pressed, the NR function will change as follows:
OFF
NOISE REDUCTION1
(Noise is reduced)
7 MOVIE Button
Press to manually set the method of Y/C separation and image interpo-
lation.
8 STILL Button
Press to display still images such as those from document cameras, etc.
The Y/C separation and image interpolation will be set for the still
screen mode.
B MONITOR Button
Switches the MONITOR OUT jack output at the time of RGB input.
Each time this button is pressed, the MONITOR OUT jack output will
change as follows:
VIDEO1
VIDEO2
VIDEO3
C VIDEO 1 through 5 Button
Switches the video input mode.
D REMOTE Jack
For service personnel only.
E Remote Sensor Window
Receives the signal from the wireless remote control.
F VIDEO 1, 2, 3, 4, 5 Indicator
Lights when the unit is switched to the video input mode with the
VIDEO 1 through 5 buttons.
G NTSC Indicator
Lights when an NTSC standard signal is received. IDTV processing is
in operation when this indicator is lit.
F
G
VIDEO
NTSC
PAL
1
2
3
4
5
NOISE REDUCTION 2
(Noise is further reduced)
VIDEO4
VIDEO5
OFF
H
I
J
NOISE
MONITOR
RGB
MOVIE
REDUCTION
1
2
1
9 NORM. SET Switch
This is an adjustment switch for service personnel.
0 NORMALIZE Button
Sets the various adjustments to the standard settings (which had been
set at the factory prior to shipping).
A RGB Button
Switches the unit to the RGB input mode.
H MONITOR Indicator
Lights when the MONITOR OUT output is selected at the time of RGB
input.
I RGB Indicator
Lights when the unit is switched to the RGB input mode with the RGB
button.
J NOISE REDUCTION 1 and 2 Indicators
Indicate the mode selected with the NR button.
K MOVIE 1, 2 and 3 Indicators
Indicate the mode selected with the MOVIE button.
L STILL Indicator
Lights when the STILL button is switched on.
K
L
STILL
2
3
6
7
Advertisement
Table of Contents
