| SPECTRAVIEW II - USER'S GUIDE
Preferences dialog - Display tab
Lock OSD (On Screen Display) controls when calibrated - selects if the monitor's On Screen Display control
buttons are locked when the monitor is calibrated. Locking the controls can be useful to prevent accidental or
unauthorized adjustment of the monitor once it is calibrated. Options are:
Don't lock
•
Lock all except Bright and Contrast
•
Lock all
•
Note: The controls will be unlocked if the calibration is turned off in the main window.
Use Auto Luminance (if supported) - enables the Auto Luminance sensor circuit inside the display monitor
to increase the Intensity (brightness) stability as the display ages and warms up. This feature will not be used
for Targets with "Maximum Possible" Intensity selected, or if the Target Intensity falls outside the range that
the Auto Luminance circuit is capable of controlling. This feature is only available on the following models:
LCD2490WUXi, LCD2490WUXi2, LCD2690WUXi, LCD2690WUXi2, and LCD3090WQXi.