Drive-Cliq Interface X500; X520 Analog Inputs/Temperature Sensor - Siemens SINAMICS G130 Operating Instructions Manual

Electrical installation
4.3 Interface description
4.3.2

DRIVE-CLiQ interface X500

Table 4- 2 DRIVE-CLiQ interface X500
Pin
1
2
3
4
5
6
7
8
A
B
Blanking plate for DRIVE-CLiQ interfaces (50 pcs.) Order number: 6SL3066-4CA00-0AA0
4.3.3

X520 analog inputs/temperature sensor

Table 4- 3 Terminal block X520
Terminal
1
2
3
4
5
6
Max. connectable cross-section: 1.5 mm²
Risk of electric shock!
Only temperature sensors that meet the protective separation specifications laid down in
EN 61800-5-1 may be connected to terminals "+Temp" and "-Temp".
If these instructions are not complied with, there is a risk of electric shock!
NOTICE
The KTY temperature sensor must be connected with the correct polarity.
16
Signal name
TXP
TXN
RXP
Reserved, do not use
Reserved, do not use
RXN
Reserved, do not use
Reserved, do not use
+ (24 V)
M (0 V)
Designation
AI 0+
AI 0-
AI 1+
AI 1-
+ Temp
- Temp
DANGER
Technical specifications
Transmit data +
Transmit data -
Receive data +
Receive data -
Power supply
Electronics ground
Technical data
2 analog differential inputs
voltage range: ±10 V
resolution: 13 bit
common mode range ±30 V with respect to ground potential
Temperature sensor KTY84-1C130 / PTC
Operating Instructions, 03/2012, A5E02142235A
Voltage Sensing Module 10 (VSM10)