Advertisement
Lamp unit replacement procedure
Check that the area around the lamp unit has cooled down.
1
Use a Phillips screwdriver to loosen the two lamp unit cover fixing
2
screws at the rear of the projector until they turn freely, and then
remove the lamp unit cover.
Use a Phillips screwdriver to loosen the 3 lamp unit fixing screws
3
until the screws turn freely, and then hold the handles of the lamp
unit and gently remove the lamp unit from the projector.
Insert the new lamp unit while making sure that the direction is
4
correct, and then use a Phillips screwdriver to securely tighten the 3
lamp unit fixing screws.
When inserting the new lamp unit, be particularly sure to push it in at point (A).
Install the lamp unit cover, and then use a Phillips screwdriver to
5
securely tighten the lamp unit cover fixing screws.
NOTE:
● Be sure to install the lamp unit and lamp unit cover securely.
Lamp unit cover
Lamp unit fixing screws
Handles
Lamp unit
fixing screws
Lamp unit cover
fixing screws
E
nglish
-3
Advertisement
