NEC IW77 Assembly Instructions Manual page 7

IWSTAND Assembly Instructions
IW77 Whiteboard Bracket Attachment
For a secure attachment to the IWSTAND, install
mounting bracket (20) to the lower horizontal frame
member (5) as shown.
Using the hex key, loosely attach the bracket (20) to
frame member with a (11) M8x20 screw. Move
bracket up until it touches the "U" bracket just at-
tached to bottom side of board. Attach "U" bracket
to the mounting bracket. Now tighten (11) M8
screw.
Connections
You are now ready to start using the your Interactive
Whiteboard. Please follow the directions that came with
the IW77 Board for connections and instructions for
usage.
In the travel position the IWSTAND Stand is quite stable for movement. For safe transport across rough
surfaces or ramps and inclines, the user should request the assistance of a second person.
Caution
© NEC Display Solutions of America. All Rights Reserved, 2007.
5
11
20