Advertisement
OPTIONAL: Press cable clip (O) into hole on
adapter plate (H) indicated below. Pull on
cable clip (O) to make sure it is engaged.
Use cable tie (P) with cable clip (O) for cord
management.
Find your projector from the models listed below. Fasten M4 x 25 mm thumb screw (L) and .313 x .198 x .688H
retaining spacer (K) to adapter plate (H) at hole indicated on the corresponding hole pattern diagram. Close
adapter plate (H) and tighten thumb screws (L & N).
A. VT37, VT47, VT470, VT570, VT575, VT670, VT676,
LT280, LT380
C. VT48, VT480, VT580
N
Visit the Peerless Web Site at www.peerlessmounts.com
Accessories listed in the included sheet, as well as other parts,
can be ordered through Peerless by calling 1-800-729-0307 or
visiting www.peerlessindustries.com.
O
N
L
H
L
H
Fasten M4 x 10 mm thumb screw (N) and .313 x
.198 x .25H retaining spacer (M) to adapter plate
(H) as shown below.
M
N
B. VT46, VT460, VT465, VT560, VT660, VT660k
7 of 8
For customer service call 1-800-729-0307 or 708-865-8870.
H
N
H
ISSUED: 11-16-05 SHEET #: 055-9447-2
L
Advertisement
