Sharp FO-1470 Operation Manual page 15

all-ux510A.book Page 13 Thursday, September 14, 2000 9:05 AM
Connecting the telephone line cord
Insert one end of the line cord into the jack on the back of the machine
marked TEL. LINE. Insert the other end into a standard (RJ11C)
single-line wall telephone jack.
Note: The fax machine is set for tone dialing. If you are on a pulse
dial line, you must set the fax machine for pulse dialing. Press the
keys on the operation panel as follows:
1
Press these keys:
The display will show:
DIAL MODE
2
Press 1 to select tone dialing, or 2 to
select pulse dialing.
3
Press the STOP key to return to the
date and time display.
Be sure to insert the line
into the TEL. LINE jack.
Do not insert it into the
TEL. SET jack.
FUNCTION
4
TONE
Connections
PULSE
1 2
or
STOP
13