Advertisement
Quick Links
Operator's Manual
3000 PSI
2.8 GPM
PRESSURE WASHER
Model No. 580.752360
PRESSURE WASHER
CUSTOMER HELPLINE
1-800-222-3136
HOURS: Mon. - Fri. 8 a.m. to 5 p.m. (CT)
WARNING
Before using this product, read this
manual and follow all Safety Rules
and Operating Instructions.
This pressure washer is rated in accordance to the Pressure Washer Manufacture Association (PWMA) standard PW101 (Testing and Rating
Performance of Pressure Washers).
Esta limpiadora a presión está clasificada conforme a la norma PW101 (comprobación y clasificación de rendimiento de limpiadoras a
presión) de la Asociación de fabricantes de bombas a presión (Pressure Washer Manufacture Association, PWMA).
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
Visit our Craftsman website: www.craftsman.com
Part No. 205694GS Draft A (02/01/2008)
ADVERTENCIA
Antes de utilizar el producto, lea este
manual y siga todas las Reglas de
Seguridad e Instrucciones de Uso.
• Safety
• Assembly
• Operation
• Maintenance
• Parts
• Español, p. 34
Advertisement
Related Manuals for Craftsman 580.752360
Summary of Contents for Craftsman 580.752360
- Page 1 Esta limpiadora a presión está clasificada conforme a la norma PW101 (comprobación y clasificación de rendimiento de limpiadoras a presión) de la Asociación de fabricantes de bombas a presión (Pressure Washer Manufacture Association, PWMA). Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. Visit our Craftsman website: www.craftsman.com Part No. 205694GS Draft A (02/01/2008)
-
Page 2: Table Of Contents
If this pressure washer fails due to a defect in material or workmanship within one year from the date of purchase, return it to any Sears store, other Craftsman outlet, or Sears Parts & Repair Center in the United States or Canada for free repair (or replacement if repair proves impossible). - Page 3 WARNING WARNING The engine exhaust from this product contains Fuel and its vapors are extremely flammable and chemicals known to the State of California to cause explosive. cancer, birth defects, or other reproductive harm. Fire or explosion can cause severe burns or death.
- Page 4 WARNING WARNING The high pressure stream of water that this Starter and other rotating parts can entangle equipment produces can cut through skin and its hands, hair, clothing, or accessories. underlying tissues, leading to serious injury and possible amputation. • NEVER operate pressure washer without protective housing or Spray gun traps high water pressure, even when covers.
-
Page 5: Features And Controls
FEATURES AND CONTROLS KNOW YOUR PRESSURE WASHER Read the Operator’s Manual and safety rules before operating your pressure washer. Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference. A - Spray Tips —... -
Page 6: Assembly
5. If any parts are missing or damaged, call the pressure washer helpline at 1-800-222-3136. Tighten by hand. Assembling Your Pressure Pasher Your Craftsman pressure washer will need assembly before operation: Fill out and send in registration card. Attach handle. - Page 7 Add Engine Oil 1. Use clean, fresh, regular UNLEADED fuel with a minimum of 86 octane with equipment. DO NOT mix oil Place pressure washer on a flat, level surface. with fuel. Clean area around oil fill and remove oil fill cap/dipstick. 2.
- Page 8 Connect Hose and Water Supply to Pump Run water through garden hose for 30 seconds to clean out any debris. Turn off water. NOTE: Remove and discard the shipping caps from the pump’s IMPORTANT: DO NOT siphon standing water for the water high pressure outlet and water inlet before attaching hoses.
-
Page 9: Operation
OPERATION HOW TO USE YOUR PRESSURE WASHER To Start Your Pressure Washer To start your engine-powered pressure washer for the first If you have any problems operating your pressure washer, time, follow these instructions step-by-step. This starting please call the pressure washer helpline at 1-800-222-3136. information also applies whenever you start the engine after Pressure Washer Location you have let the pressure washer sit idle for at least a day. - Page 10 Move throttle lever (A) to “Fast” position, shown as a 12. When starting engine, position yourself as rabbit. recommended and grasp starter grip handle and pull slowly until you feel some resistance. Then pull rapidly to start engine. 10. Move choke lever (B) to “Closed” position. NOTE: For a warm engine, be sure the choke lever is in the “Open”...
- Page 11 How to Stop Your Pressure Washer WARNING 1. Release spray gun trigger and let engine idle for two The high pressure stream of water that this minutes. equipment produces can cut through skin and its 2. Move throttle lever to “Slow” position, shown as a turtle. underlying tissues, leading to serious injury and possible amputation.
- Page 12 How to Use Spray Tips How to Use the Turbo Nozzle The quick–connect on the nozzle extension allows you to The turbo nozzle spins a 0° nozzle stream in a circular switch between four different quick connect spray tips. Spray pattern, providing an intense wide-spray pattern for scouring tips can be changed while pressure washer is running once large surface areas fast and efficient.
- Page 13 Place small filter end of detergent siphoning tube into Increase (decrease) spray pressure by turning pressure detergent container. control knob (A) clockwise (counterclockwise). Use lower pressure to wash items such as a car or boat. Use NOTE: Make sure the filter is fully submerged in detergent higher pressure to strip paint and degrease driveways.
-
Page 14: Specifications
MAINTENANCE PRODUCT SPECIFICATIONS OWNER’S RESPONSIBILITIES Follow the hourly or calendar intervals, whichever occurs Pressure Washer Specifications first. More frequent service is required when operating in Pressure ..... 3,000 PSI adverse conditions noted below. - Page 15 General Recommendations Check and Clean Inlet Screen Regular maintenance will improve the performance and Examine garden hose inlet screen. Clean if it is clogged or extend the life of the pressure washer. See any Sears or replace if it is torn. other qualified service dealer for service.
- Page 16 O–Ring Maintenance 3. Remove spray tip from end of nozzle extension. 4. Use a small paper clip to free any foreign material Purchase an O–Ring Repair Kit at your local Sears or by calling 1-800-4-MY-HOME (469-4663) or online at www.sears.com. It clogging or restricting spray tip (A).
- Page 17 ENGINE MAINTENANCE Changing Engine Oil Change engine oil after the first 20 hours and every WARNING 100 hours or 6 months, whichever comes first, thereafter. If you are using your pressure washer under extremely dirty or dusty conditions, or in extremely hot weather, change oil more often.
- Page 18 Service Air Cleaner Using a moist rag, wipe dirt from inside of air cleaner base and cover. Be careful to prevent dirt from entering Your engine will not run properly and may be damaged if you air duct that leads to the carburetor. run it with a dirty air cleaner.
- Page 19 Spark Arrester Service Remove 4 mm screw (C) from spark arrester (D) and remove spark arrester from muffler. Your engine is not factory-equipped with a spark arrester. In some areas, it is illegal to operate an engine without a spark Use a brush to remove carbon deposits from spark arrester.
- Page 20 AFTER EACH USE Disconnect hose from spray gun and high pressure outlet on pump. Drain water from hose, gun, and spray Water should not remain in the unit for long periods of time. tip extension. Use a rag to wipe off the hose. Sediments or minerals can deposit on pump parts and “freeze”...