3-1. Preparation
Required equipment/tools
. USB memory (FAT 32 format, 1 GB or more)
Connection for update
USB connection
USB memory
3-2. Firmware Update
1. Insert the USB memory having the update folder prepared in "Download the update program to the
USB memory" into the USB connecting terminal of main unit.
(Refer to the Operating Instructions.)
2. Turn on the power of this unit.
t
At the time of initial startup, Flash ROM may be updated, and it may takes approximately 5 minutes
to output the image.
3. The update proceeds automatically. The ON/STANDBY indicator blinks in green. Then, it blinks in
amber. (During update: approx. 3 minutes max)
4. After the update is completed, the ON/STANDBY indicator lights up in red and this unit enters
standby state.
VPL-VW760ES
Section 3
Software Update
USB connecor
3-1 (E)