Motorola iDEN i50sx User Manual page 158

Setting Auto Redial
When Auto Redial is set to On, if you receive a System Busy, Try Later
message while making a call, the phone will redial the number automatically.
You will hear a ring-back tone when a successful call is placed.
When Auto Redial is set to Off, you must press and hold s to redial the last
number dialed.
Setting Backlight Timer
The backlight illuminates the display when you receive or make calls. You can
set the amount of time that the backlight stays on to 5, 10, 20, or 30 seconds, or
set it to stay on continuously or stay off at all times.
Press m, then scroll to Settings. Press A under SELECT. Press R
1
to scroll to Initial Setup.
From the Initial Setup screen, press R to scroll to Backlight.
2
Press B under CHANGE.
3
Press S to scroll to the desired backlight option.
4
Press B under SELECT.
5
IMPORTANT: Setting the backlight to stay on continuously may
Adjusting Status Light
The status light is part of your phone's power button. It illuminates when the
phone is on. You can turn the status light feature on or off from the Initial Setup
screen.
Setting Text Display
You can set your phone's text display area to show more text using smaller
characters or less text using larger characters. The size and amount of text
displayed depends on the view selected:
• Standard view — five lines of text, 14 characters per line.
• Compressed view — seven lines of text, 18 characters per line.
150
degrade backlight brightness over time.
nextel.com