Motorola iDEN i50sx User Manual page 168

Removal and Replacement Procedure
1
While holding the back of the phone, press the faceplate release button
located at the bottom of the phone to release the faceplate.
2
In an upward motion, grasp the bottom part of the faceplate and detach
it from the phone, while also detaching the upper part of the faceplate
from the phone.
3
Remove the keypad from the phone (or from the faceplate).
4
To replace the faceplate and keypad, lay the keypad on the phone body.
5
As shown in the illustration, attach the faceplate to the phone body, first
at the top and then at the bottom. Rotate faceplate towards bottom of the
phone until the lower snap is engaged. Snap engagement will be
verified by a click sound. After the lower snap is engaged, verify that
the upper snap is engaged by pressing the earpiece area.
6
Re-apply power to the phone by pressing the power button located on
the top of the phone.
160
nextel.com