Removing The Battery; Sleep Mode - Motorola iDEN i605 User Manual

Digital multi-service data-capable phone
Hide thumbs Also See for iDEN i605:
Table of Contents

Advertisement

Removing the Battery

1 With your phone powered off, remove the
battery door.
2 Remove the battery by pushing it toward the
antenna and lifting it out.
Battery Use and Maintenance
• The Motorola iDEN Approved Lithium Ion
chargers provide optimum performance. Other
chargers may not fully charge the iDEN Lithium
Ion battery or may yield a reduced number of
lifetime charge cycles.
• Extreme temperatures degrade battery
performance. Do not store the battery where
temperatures exceed 140°F (60°C) or fall below
4°F (-20°C).
• Lithium Ion batteries have a self discharge rate
and without use, lose about 1% of their charge
per day.
• The battery capacity is degraded if the battery is
stored for long periods while fully charged. If
long term storage is required, store at half
capacity.

Sleep Mode

To conserve battery supply, your phone uses
Sleep mode. With Sleep mode, after your phone
has been idle for a specified interval, the display on
your phone will turn off.
You can set your phone to enter Sleep mode after
1 minute, 3 minutes, 5 minutes, or 15 minutes of
inactivity. See "Display/Info Features" on page 145.
Sleep mode turns off when you either press a key
or receive a call alert or phone call.
Holster
When you place your i605 phone in the holster that
you received with your phone, your phone will go
into Sleep mode to preserve the phone's battery
life. The holster contains a magnet that activates
Sleep mode on your phone.
Note: Maintain a minimum distance of 1/4 inch
between the magnet and any media that
contains digital information, such as credit
cards, debit cards, etc., as this digital
information could be erased by the
magnet.
Battery
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nextel iden i605

Table of Contents