Page 3
IMPORTANT NOTICE: PLEASE READ PRIOR TO USING YOUR PHONE The SIM card provided in this kit is intended for use with the phone provided in this package. Loss of certain features will result when using a SIM card from one of the following models: i30sx, i35s, i50sx, i55sr, i58sr, i60c, i80s, i85s, i88s, i90c, i95cl series, and the i2000 series.
Enabling Over-the-Air Security......7 Recent Calls ..........24 Phone Programming .........7 Calls and Call Alerts ........24 Finding Your Phone Number and LINC ID ..7 My Info From Other Phones ......24 Phone Basics ............8 Contact Information From Other Phones ..25 SIM Card Security ...........12 Viewing the Recent Calls List......25...
Page 6
Viewing Entries..........31 Call Timers ............43 Deleting Entries ..........34 Using Your Phone as a Modem ......43 Checking Capacity ..........34 Making TTY Calls ..........45 Creating Pauses and Waits......34 Memo ............47 International Numbers ........35 Making Calls From Contacts ......35 Ring Tones ..........48 Accessing Contacts with GSM Phones ...36 Setting Your Phone to Vibrate......48...
Page 7
Receiving a Message ........57 Sending a Picture ..........72 Reading from the Message Center ....58 Receiving a Picture .........73 Creating and Sending Messages ....58 Sending My Info and Contact Information ..74 Sorting Messages..........61 My Info ............77 Managing Memory...........61 Viewing My Info ..........77 Media Center ..........
Page 8
Deleting Voice Records........81 Receiving Items..........94 Managing Memory...........81 GPS Enabled..........96 Java Applications ........82 IMPORTANT: Things to Keep in Mind ....96 Installing Applications........82 Making an Emergency Call ......97 Running Applications........82 Viewing Your Approximate Location ....98 Suspending Applications .........82 Enhancing GPS Performance ......99 Resuming Applications........83...
Page 9
Airplane Mode—Temporarily Turning Off Calls ............114 Safety and General Information ....130 Using Settings ..........114 RF Operational Characteristics .....130 Profiles ........... 119 Portable Radio Product Operation and EME Viewing Profiles..........119 Exposure...........130 Switching Profiles ..........119 Electromagnetic Interference/Compatibility...133 How Changing Settings Affects Profiles..119 Medical Devices ..........133...
Page 10
DECLARATION OF CONFORMITY Note: This equipment has been tested and found to comply with the limits for a Class Per FCC CFR 47 Part 2 Section 2.1077(a) B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to...
If your SIM card is not in the SIM card holder, it may be in the box your phone came in, attached to To start using your i605 phone: a piece of plastic about the size of a credit card.
Inserting the Battery 1 Remove the battery door. Removing the Battery Door 2 Insert the top of the battery into the battery area. 1 Make sure the phone is powered off. Press the bottom of the battery to secure it.
Page 14
30 minutes longer than the time cover shown in “Charging Times”. Charging Times Check your battery and charger type against the grid below to determine appropriate charging times. 3 Plug the other end of the charger into the accessory connector. Battery Charger Rapid Standard High 2 hours 5.5 hours...
1 With your phone powered off, remove the per day. battery door. • The battery capacity is degraded if the battery is 2 Remove the battery by pushing it toward the stored for long periods while fully charged. If antenna and lifting it out.
If the Enter SIM PIN Code screen appears, enter information could be erased by the your SIM PIN. See “Entering the PIN” on page 12. Press A under Ok. magnet. When you receive your phone, the SIM PIN is Activating Service 0000.
To accept programming: your phone: 1 When you receive an alert notification saying 1 When you power on your phone for the first time, New Browser Message - Receive Programming Info, press O or press A under after the idle screen appears, you will be prompted to select Ok to update your browser Goto.
Your phone’s features are arranged in menus, text area submenus, and lists. To access the items in a menu or list, scroll using the navigation key at the top of your keypad. This key lets you scroll up, down, left, or right. Holding...
See page 28. All your phone’s features can be accessed through Messages Access messages. See the main menu. You can set the main menu to page 54. appear as a list or as large icons. Call Forward Set call forwarding Browser Apps Browse the Web.
Status Icons Memo Store a number to access later. See page 47. Status icons appear at the top of the display. Some appear at all times. Others appear only when your Call Timers Phone usage information. phone is engaged in certain activities or when you See page 43.
Page 21
Internet — You are ready to browse the internet. Delete. • To insert or delete a digit anywhere in the string Voice Record — You have one or of digits you have entered, scroll left or right. more voice records stored. See page 79.
Changing the PIN To prevent unauthorized use of your phone, your SIM card may be protected by a PIN that you enter 1 From the main menu, select Settings > each time the phone is powered on. You can Security >...
Page 23
When the SIM PIN requirement is on, you are replaced. If this happens, all data is prompted to enter your PIN each time you turn on lost. You will get a message to contact your phone.
Page 24
If you remove your SIM card and Battery” on page 5. use it with another phone, or use another SIM card 2 Hold your SIM card as shown. Do not touch the with your phone, the following information is gold-colored area.
1 With your phone powered off, remove the avoid touching the antenna with any body part. battery door and battery. 2 While holding the tab down, slide your SIM card out of the SIM card holder. SIM card holder...
To order accessories, log on to the SouthernLINC Wireless Web site at www.southernlinc.com/store/ or contact your SouthernLINC Wireless sales representative. Note: When you place your i605 phone into the holster, your phone goes into Sleep mode. For More Information If you have questions about your i605 phone, contact your sales representative or SouthernLINC Wireless at 1-800-406-0151.
Making Calls An InstantLINC Mobile to Mobile call ends automatically if there is no activity on the call for a few seconds. Your i605 phone makes two types of calls: digital cellular phone calls and InstantLINC Mobile to Tip: To let someone know you want to talk to Mobile calls.
1 Wait for the caller to finish speaking. • Select the number from the recent calls list. See “Making Calls From the Recent Calls List” on 2 Press and hold the PTT button on the side of page 26. your phone. Begin talking after your phone emits a chirping sound.
Dial number (1 through 9) assigned to the phone Your phone plays the name back to you. number you want to call. 3 If you are making a phone call, the call is placed Redialing the Last Number automatically. Press and hold s to place a call to the last phone Tip: To stop a phone call from being completed, number you called.
Speakerphone is available whenever you Emergency phone calls can be made even when are on an active phone call. your SIM card is blocked or not in your phone. To turn speakerphone on or off: Dial 911 to be connected to an emergency Press A under Spkr.
Page 31
Making Emergency Phone Calls Important: If you have not registered on the network, emergency calls cannot be placed while your SIM card is in your phone.
Sending Call Alerts you have received. They appear as InstantLINC Mobile to Mobile calls. Call 1 Enter the LINC ID you want to send to, as you alerts remain in your recent calls list until would when making an InstantLINC Mobile to you delete them or until they reach the Mobile call.
Page 33
Viewing Date and Time Deleting Call Alerts To view the date and time a call alert was received: To delete a call alert from the queue: 1 From the main menu, select Call Alert. 1 From the call alert queue, scroll to the call alert 2 Select the call alert you want information on.
The recent calls list stores information associated delete them or until they reach the end of the list. with calls you have made and received, and call alerts you have received. It also stores My Info and For phone calls, an additional icon appears giving contact information sent to you from other phones.
When you select contact information to view its than once, only the most recently sent version details, you see the name or LINC ID of the person appears in the recent calls list. who sent the information and all the information in the item.
Recent Calls 2 Select Recent Calls View. 4 If the item you want to store is a call, you must assign a Contacts type to the number: 3 Select List View to show the recent calls list without pictures. -or-...
Page 37
LINC ID of the phone that sent the information. • If you scroll to a call, you can make a call to 2 To make a phone call, press s. -or- the number that made the call. If the number...
A Contacts entry contains: Work2 phone number • A name — A name is required if you are storing Home phone number more than one number or address to the entry; otherwise, it is optional. Typically, this is the...
From the Contacts list, press m. Select New. number or change it. 2 If you want to assign a name to the entry: • A voice name — If you create a voice name for a number, you can then dial that number by saying Select Name.
Page 40
Speed # field. Tone/Picture]. This is always the next available Speed Dial 2 If you want to assign a ring tone from the list of location. ring tones: With Ringer highlighted, scroll left or right to...
Editing Entries When you are finished, press O. 1 From the Contacts list, scroll to or select the 3 If you want to create a voice name for a phone entry you want to edit. number, select Voice Name. 2 Press A under Edit. -or- As directed by the screen prompts, say and If Edit is not one of your options: Press m.
Page 42
<> address stored, surrounds the Contacts type details about the entry by selecting items within the icon. Scroll left or right to view the icon for each entry. number stored in the entry. Viewing Details of a Number or Address Selecting an Entry 1 Select the entry.
Page 43
Showing Only LINC IDs and You can set Contacts to show the picture assigned Talkgroups to each entry as you view the Contacts list or show the Contacts list without pictures. To set Contacts to show only entries that contain LINC IDs and Talkgroup entries: 1 From the Contacts list, press m.
International Numbers To program a wait: 3 To place the call now, go to step 4. -or- Press and hold * until the letter W appears. Scroll left or right to display the Contacts type for The W means your phone waits before dialing the number you want to call.
4 To make a phone call, press s. -or- To make an InstantLINC Mobile to Mobile call, press the PTT button. If you try to make a type of call that does not match the Contacts type of the number you chose, no call is placed.
When you set your phone to forward all calls, an icon appears in the top row of the display: 3 To enter the number you want to forward calls to: Enter the number using your keypad. -or- Phone line 1 is active; calls to phone line 1 are being forwarded.
You can specify a forwarding number for each type of missed call: Enter the number using your keypad. -or- • If Busy — Your phone is on a call or transferring Press A under Search. Select Contacts, data. Recent Calls, or Memo. Select the number you •...
To turn off Call Waiting for the next call you make If you are on a call and receive a second call, your or receive: phone emits a tone and displays a message saying you are receiving a second call.
1 Press m. If you want to make the call active again, press A 2 Select Join. under Resume. All 3 people in the call can speak to and hear each Calling 2 People other. Making a 3-Way Call Putting a Call on Hold, Making a Second Call 1 Place or receive a phone call.
While Dialing One Touch PTT sets your phone to call the most recent LINC ID on the recent calls list, or a LINC ID You can enter a pause or wait while dialing a you choose, every time you press the PTT button.
Making Group Calls Group Calls 1 Press #. Then enter the Talkgroup number A group call is similar to an InstantLINC Mobile to using the keypad. -or- Mobile call, but is made to all members of a Choose the Talkgroup name from Contacts or Talkgroup at once.
To set your phone to prevent you from hearing and group calls. group calls to your Talkgroup: • Circuit Reset — keeps a running total of all of 1 From the main menu, select Settings > your circuit data use, until you reset it.
Page 54
To use a data cable to connect your phone with a laptop, handheld device, or desktop computer: 1 Open the connector cover. 3 Insert the data plug into the data port of the other device. Connecting with Bluetooth To use your phone as a modem via Bluetooth, the...
Making TTY Calls From the main menu, select Settings > Phone Calls > TTY > Use TTY. This field must say On. To use your phone to make phone calls using a teletypewriter (TTY) device: Choosing a Mode 1 Connect one end of a 2.5mm cable into the...
Page 56
Advanced Calling Features When you make a TTY call, the call begins in the To change the TTY baud rate: TTY mode you last selected. 1 From the main menu, select Settings > Phone To change mode during a call using your phone: Calls >...
Memo To store the memo number to Contacts: 1 From the main menu, select Memo. Memo lets you store a number, make a call to that 2 Press m. number, and save it to Contacts. 3 Select Store to Contacts.
1 From the main menu, select Ring Tones > 2 Make sure VibeAll is set to Off. VibeAll. 3 Scroll through the list of ring tones and select the 2 Set this option to On. one you want to assign. Vibrate sets your phone Tip: Pressing the volume controls to turn down to vibrate instead of making a sound;...
2 Make sure VibeAll is set to Off. speaker. 3 Scroll through the list of ring tones and select the one you want to assign. These icons may appear at the same time.
Contacts. services may not be offered by SouthernLINC Wireless. Please contact SouthernLINC Wireless Except for DRM ring tones, if you delete a ring tone for more information about these services. that you purchased from your phone, you will have to purchase it again.
Page 61
Deleting Custom Ring Tones 4 Press m. 5 Select Delete. 6 Press A under Yes to confirm.
Numeric — Enter numbers. The displayed word may change as you type it. Do not try to correct the word as you go. Type to When you access a screen that requires you to the end of the word before editing.
Special Function Keys Adding Words to the Database Capitalization When you press and hold the # key, it acts as a 1 Select Alpha as your text input mode. 3-way toggle. Press and hold # to make the next 2 Type the word using Alpha mode.
Messages If you are not on a phone call when you receive a message, your phone sounds a notification tone every 30 seconds until you access the message, You can receive the following types of messages you dismiss the notification, or the alert time-out on your phone: expires.
To access your messages through the message center: 1 From the main menu, select Messages. 2 Scroll to the type of message you want to access. 3 Press O or press A under the display option on the left.
Sending Unanswered Calls to Voice Mail Note: To receive voice mail messages, you must first set up a voice mail account with To send a phone call to voice mail instead of SouthernLINC Wireless. answering it: Press e. -or- Receiving a Message Press A under No.
When you are finished, press O. Before you begin using Text messaging, you may need to set up your signature, service center 8 Select Auto Clean Up. Set this option to On if number, and expiration information: you want your phone to delete sent messages.
Press the number of the message you want to context-sensitive menus in the message read. center. 3 If the message fills more than one screen, scroll 2 To address the message: to read it. Tip: Scrolling through one message lets you Use the keypad to enter the phone number of view the next message.
Page 69
You can store 2 If the entry has more than one phone number up to 20 quick notes. A quick note may be up to 30 stored, view the phone number you want to send characters long.
Text Messaging Using Drafts Deleting Sent Messages When you save a message as a draft, it is saved in To delete a sent message: the drafts folder. 1 From the main menu, select Messages > Text To edit a draft: Outbox.
Sorting Messages Unlocking a Message The text inbox holds 20 messages. If the text inbox is full, you cannot receive messages until you 1 From the main menu, select Messages > Text delete some. Outbox. The outbox and drafts folder share memory space.
You can set the media center to show a thumbnail • Voice records created when your phone was not of each picture as you view the list of items or show in a call the list of items without thumbnails.
3 Select Filter. list. 4 Select All, Pictures, Audio, or Video. Tip: You can also scroll left or right, or press * Sorting by Time or Name or #, to scroll through these options while You can set the media center to sort items by the viewing the list of items.
Java Apps, the default location for any DRM items picture in the list of items. If your phone is not set to that you download is the media center. show thumbnails, this icon...
Setting as Wallpaper To stop the audio recording before it has finished playing: 1 Scroll to or select the picture you want to set as Press O. -or- wallpaper. Press A under Stop. -or-...
1 Access the media center. Assigning to Contacts 2 Scroll to or select the item you want to lock or unlock. To assign an audio recording in the media center 3 Press m.
Deleting an Item To free memory, delete items in the media center. Note: Items in the media center are stored in 1 Scroll to or select the item you want to delete. your phone using the same memory 2 Press m.
DRM item and automatically install once they have finished send it to someone. If you do not want to gift an downloading. item, you can send a message to a friend’s phone To install DRM Java applications, see “Installing...
2 Highlight the DRM item you want to gift. 5 Complete and send the message. See “Creating 3 Press m. If Gift is an option, the item is giftable. and Sending Messages” on page 58. To gift a DRM item:...
Page 80
About Expired Items Renew. 4 Select the link to the page where you purchased If you are using an item when it expires, once you the item. finish your session with the item, you will be unable 5 Follow the vendor’s instructions for purchasing to use the item.
Page 81
When ring tones and wallpapers expire, they are automatically removed from their respective lists. For expired items that continue to display in their respective lists, you can either choose to renew the license for the item or else manually delete the item.
Sending a Picture During a Call To do this, you must have the LINC ID and IP You can send a picture at any time during an address of the person you want to send to stored in InstantLINC Mobile to Mobile call, whether you your Contacts.
LINC IDs and IP addresses stored. InstantLINC Mobile to Mobile call is temporarily interrupted while a picture is transmitted. 4 Select the name of the person you want to send 3 When prompted, press the PTT button to the picture to.
When you send My Info or contact information 3 Select LINC View My Info. using LINC View, the information you send 4 Use the keypad to enter the LINC ID you want to appears on the display of the phone you are send the information to. -or- engaged in the InstantLINC Mobile to Mobile call with.
Page 85
When you receive a call and see an icon next to the name of the person who called you, you can 4 Use the keypad to enter the LINC ID you want to update the contact for that person. send. -or- To update the contact: Press A under Browse.
My Info • Circuit Data — the number you use if you want to use your phone to transfer circuit data. See “Using Your Phone as a Modem” on page 43. My Info lets you view information about your phone You receive this number from SouthernLINC and send this information to other phones.
My Info 2 Press m. You can also edit the information in Line 1, Line 2, and Circuit Data, but your changes are only 3 Select LINC View Setup > Info to Send. temporary. The next time your phone registers on...
You can record notes to a call, or only voice records created when your yourself when your phone is not in a call or record phone was not in a call. phone calls when your phone is in a call.
1 From the main menu, select VoiceRecord. 1 From the main menu, select VoiceRecord. 2 Scroll to the voice record you want to lock or 2 Select the voice record you want to play. unlock. 3 To stop the voice record while it is playing, press 3 Press m.
Memory. -or- Deleting a voice record from the voice record list With any voice record highlighted, press m. deletes it from all parts of your phone, including the Select Memory. media center. To free more memory by deleting all unlocked...
Suspending Applications installs. When you suspend an application, it does not stop 3 If you want to create a shortcut to the Java application on the main menu: Press A under running. It goes to the background so that you can run another application in the foreground.
Your phone supports gifting and Tell-A-Friend 1 From the main menu, select Java Apps. services for DRM Java applications. However, 2 If the application you want to end is part of a these services may not be offered by suite of applications, select the suite.
1 From the main menu, select Settings > 4 Select Delete All. Personalize > Menu Options > Add/Remove 5 Press O or press A under Yes to confirm. Apps. -or- From the main menu: Press m. Select Main Managing Memory Menu Setup >...
Java applications to access Granting or Denying Permission the location of your phone. Your phone protects your privacy by giving you the option to block all or If you choose By Permission, you must grant or some Java applications from accessing the deny each Java application access to the location location of your phone.
Page 96
After a given Java application requests access to requests access to the location of your phone the location of your phone for the first time, you again before you power off your phone, the have the opportunity to set the GPS privacy option request is denied without notifying you.
Page 97
• Always — The application always has permission to access the location of your phone, without notifying you. • Ask — When the application requests access to the location of your phone, you are prompted to grant or deny permission (see “Granting or Denying Permission”...
Bluetooth device. can connect automatically to your phone when it is in range. If you set a device to ask, then that device Devices must be within 32 feet (10 meters) of your must request permission before it can connect to phone to be recognized.
Bluetooth voice dialing is You can turn power to your phone’s Bluetooth turned off. feature on or off. While Bluetooth power is on, your phone can communicate with other devices. To activate voice dialing for Bluetooth: You can turn off Bluetooth if you want to prolong 1 From the main menu, select Bluetooth >...
To bond with your phone, devices must have your phone’s Bluetooth address. To find devices that To stop the search and go to the list of found you want to bond with, you can make your phone devices, press A under Stop.
Page 101
1 From the main menu, select Bluetooth. device will be voided. You will have to re-establish 2 If you want to create a bond and connect with the bond. the given device, select Hands Free > [Find Your i605 requires that you create a bond in order Devices].
Bluetooth® Setting Device Details 4 If prompted, enter the Bluetooth PIN. Your phone will connect to the device. The device history stores a list of up to 20 devices that have connected with your phone. Using Bluetooth ® During a Call...
Sending Contacts, Datebook Events and Pictures 3 Press m. Editing Device Names 4 Select Delete. You can edit a device name so the device is easier 5 To delete the device, press O. to identify. 1 From the main menu, select Bluetooth >...
4 Select Transfer. 2 Highlight the picture you want to send. 3 Press m. 5 If the event you select repeats, then you will be prompted to choose whether to send the 4 Select Transfer. selected instance of the event or all instances of 5 Select Bluetooth.
Page 105
After an incoming transfer is complete, your phone translates the item. The item appears on your phone’s display. You can choose to either store or discard the item. Items are stored as follows: Contact entries to Contacts, pictures to the media center and Datebook events to Datebook.
The availability and accuracy of this location IMPORTANT: Things to Keep information (and the amount of time that it takes to in Mind calculate it) will vary depending on the environment in which you are using the GPS feature. For...
Advice Dial 911 to be connected to an emergency on how to improve GPS performance is response center. If you are on an active call, you provided in “Enhancing GPS Performance” on must end it before calling 911.
911 operator you 2 Scroll to view the entire screen. speak to when making an emergency call, if able, just as you would when using a phone without GPS This displays the following information about the capabilities.
Enhancing GPS Performance • The number of satellites used to calculate the If you received a phone call or alert while location. In general, more satellites make for attempting to determine your location, the Position better accuracy. screen will disappear, but your phone will continue attempting to determine its location.
Page 110
Do not • Stay in the open. The GPS feature works best cover the antenna area with your fingers or where there is nothing between your phone and anything else.
GPS performance. 1 From the main menu, select GPS > Privacy. • In a car. When using the GPS Enabled feature in 2 If your GPS PIN security feature is enabled, a car, position your phone so that the GPS enter your GPS PIN.
Using GPS with Map Software When you receive your phone, the GPS security feature is turned off, so you do not have to enter a GPS PIN to access your GPS privacy options. If You can use the GPS feature of your phone to...
Page 113
The map software running on your laptop or other device must support NMEA 3.0. Getting Started 3 Insert the data plug into the COM port of your laptop or other device. To connect your phone to your laptop or other...
Page 114
GPS Enabled • Stop bits: 1 • Flow control: Hardware To set your phone to send location information to your laptop or other device: 1 From the main menu, select GPS > Interface. 2 Set NMEA OUT to On. Your phone is now sending location data to your laptop or other device.
Datebook stores up to 250 events. You can store • A reminder — If an event has a start time, you events over a 13 month period — 12 months after can set Datebook to remind you that the event is and 1 month before the current date.
Navigating Datebook to Datebook. To scroll through Datebook: If you decide you do not want to store the event: Press A under Cancel. Scroll left and right using the navigation key. -or- In week view and month view, press * or #.
Page 117
A under Done. -or- Select Custom to enter a duration. If you want to assign a ring tone, a profile, or a 6 The date automatically assigned to an event is Java application to the event, see “Assigning the date that was highlighted or selected when More Options”...
Select the ring tone you want from the ring tones stored in your phone. Select Copy. 2 If you want to assign a profile that your phone is 4 Follow the applicable instructions in “Creating switched to while the event is occurring: Events”...
If both are the same type of number, the number in Press A under View. Subject is called or sent a call alert. To call or send To dismiss the reminder: a call alert to the number stored in Location, you must delete the number stored in Subject.
Datebook To send a call alert: • Start View — sets Datebook to start in day view, week view, or month view when you access 1 Highlight or select the event containing the Datebook. number you want to call or send a call alert to.
Scroll to Speaker to set the speaker volume. 2 Select Vibrate to set your phone to vibrate. 3 To set the volume: Tip: Select Silent in step 2 to set your phone to neither vibrate nor make a sound. Scroll left or right. -or- Press the volume controls.
Page 122
Customizing Your Phone Wallpaper Note: Pictures sent to you using LINC View cannot be set as wallpaper. A wallpaper is an image that appears on the idle 1 From the main menu, select Settings > screen. Display/Info > Wallpaper > Select Pictures.
Page 123
From the main menu, select Settings > Display/Info > Backlight > Off. You can set the items on your main menu and Java applications menu to appear as large icons or a To control how long the backlight stays on: list: 1 From the main menu, select Settings >...
• Wallpaper — controls the wallpaper that Advanced > Airplane Mode. appears on the idle screen. 2 Set this option to On. • Theme — changes the look of the display. • Text Size — sets the size of text on the display.
Page 125
• DTMF Dialing — sets whether you can hear The Phone Calls menu controls how your phone keypad presses during a call. handles phone calls: • Set Line — sets phone line 1 or phone line 2 as the active line for outgoing calls.
Page 126
InstantLINC Mobile to application on the main menu. Mobile calls and group calls: • Up Key — sets the main menu item you access when you scroll up from the idle screen. • Tkgrp Silent — controls whether you hear group calls to your Talkgroup.
An unlock code is required to enable this feature, to unlock • Line 1 — sets ringer volume for phone line 1. the phone, and to set a new unlock code. • Line 2 — sets ringer volume for phone line 2.
Page 128
• Phone Only — prevents your phone from making or receiving InstantLINC Mobile to Mobile calls or group calls, or transferring data. • Baud Rate — sets the baud rate at which your phone communicates with a laptop computer, PC, or similar device.
Profiles Viewing Profiles To view the profiles stored in your phone: A profile is a group of settings saved together so that you can apply them to your phone easily. 1 From the main menu, select Profiles. 2 Scroll to the profile you want to view.
Making more changes further To set your phone to create a temporary profile updates the temporary profile, for as long as it is in that contains changes you make to settings: effect.
The temporary profile is stored with the name of 4 Select Edit. the profile it is based on. The profile it is based on, 5 Scroll through the list of options and set their as it existed before you made changes to settings, values.
5 To set filtering options for call alerts, select Filter. Alerts. 2 To set filtering options for phone calls, select • Off sets your phone to notify you of all call Phone. alerts. • Off sets your phone to notify you of all phone •...
Page 133
• Text Messages sets your phone not to sound a tone or vibrate when you receive text messages. • All sets your phone not to sound a tone or vibrate when you receive any message. Note: When you receive a type of message you...
6 Press O. Shortcuts 7 If you want to record a voice name for the shortcut: Select Voice. As directed by the Shortcuts lets you access most menu options by screen prompts, say and repeat the name you pressing a number on your keypad (1 through 9) or want to assign to the number.
4 Press O or press A under Yes to confirm. 7 Press A under Insert. 8 Repeat step 4 through step 7 for all the items you want to move. 9 Press A under Done. To change the number or voice name assigned to a shortcut: 1 From the main menu, select Shortcuts.
Using a Headset Attaching a Headset 1 Lift the audio jack cover. If you use a headset or similar device with your 2 Insert the headset connector firmly into the phone, you can set your phone to send incoming audio jack. You may have to rotate the headset sound to the headset only, or to the headset and connector until it fits securely into the audio jack.
The person that you called has not SouthernLINC Wireless Customer User Not purchased this service. Care if you believe this is a valid SIM Authorized card. Please Try Later This service is temporarily not A fault was detected with your phone.
Page 138
Warns of low memory for Net Alerts. New Browser Bluetooth is not ready. Please try Bluetooth Not Message again. Initialized Memory Full! Unable to Bond Bonding has timed out. Please try Searching for GPS satellites. Scanning for again. Satellites...
Page 139
Status Message Description Messages A new device is trying to bond with Bluetooth Bond your phone, but the device history is at Failed: List Full its maximum of 20 devices. An error with the Bluetooth device Bluetooth database has occurred. Please contact Device SouthernLINC Wireless.
• ANATEL, Brasil Regulatory Authority, Resolution the network. 303 (July 2, 2002) "Regulation of the limitation of exposure to electrical, magnetic, and Portable Radio Product electromagnetic fields in the radio frequency range between 9 kHz and 300 GHz."...
Page 141
50% talk/50% listen. in the two-way radio mode, then ensure the...
Page 142
FCC for each model. The highest GOVERNMENT’S REQUIREMENTS FOR EXPOSURE SAR value for this model phone when tested for use at the TO RADIO WAVES. ear is 1.25 W/kg and when tested on the body, as described in this user guide, is 1.16 W/kg during packet...
When instructed to do so, turn off your radio product when on board an aircraft. Any use of a Approved Accessories radio product must be in accordance with applicable regulations per airline crew instructions.
Hearing Aids Do not place a portable radio product in the area over the air bag or in the air bag deployment area. Some digital wireless radio products may interfere Air bags inflate with great force. If a portable radio with some hearing aids.
Blasting Caps and Areas If your radio product interior gets wet, then do not try to accelerate drying with the use of an oven or a To avoid possible interference with blasting dryer as this will damage the radio product and operations, turn off your radio product when you void the warranty.
Also, avoid applying liquids directly on the radio product. • To reduce the risk of damage to the cord or plug, Accessory Safety Information pull by the plug rather than the cord when you disconnect the battery charger from the power Important: Save these accessory safety source outlet.
Page 147
Use of an improper extension cord could result the AC receptacle. in a risk of fire and electric shock. If an extension • To reduce risk of electric shock, unplug any cord must be used, make sure that: battery charger from the outlet before attempting any maintenance or cleaning.
Products ("Accessories") and product. Motorola software contained on CD-Roms or other Products or The balance of the tangible media and sold for use with these Accessories that are original warranty or Products ("Software") to be free from defects in Repaired or Replaced.
Page 149
Product or may subscribe to or use with the Products, Accessory to abnormal usage or conditions; or (d) Accessories or Software is excluded from other acts which are not the fault of Motorola, are coverage. excluded from coverage.
Page 150
Motorola iDEN Customer Services parties, that the operation of the software products 1-800-453-0920 or 954-723-4910 will be uninterrupted or error free, or that all defects in the software products will be corrected. TTY-877-483-2840 Software NOT Embodied in Physical Media.
Page 151
LIABLE, WHETHER IN CONTRACT OR TORT of the Motorola software. Motorola software may (INCLUDING NEGLIGENCE) FOR DAMAGES IN only be copied into, used in, and redistributed with, EXCESS OF THE PURCHASE PRICE OF THE the Products associated with such Motorola PRODUCT, ACCESSORY OR SOFTWARE, OR software.
Motorola and third party software stored in semiconductor memories or MOTOROLA, the Stylized M Logo and all other other media. Laws in the United States and other trademarks indicated as such herein are countries preserve for Motorola and third party trademarks of Motorola, Inc.
95 safety 136 bonds 88, 90 transfers, canceling 94 Airplane mode connections, making 90 turning on or off 89 icon 11 deleting received items 95 viewing received items 95 power button 6, 114 device details 92 settings 118...
Page 154
Mobile to Mobile calls reminders 109 international 41 international numbers 35 setting up 110 making 17 pictures 28, 29, 30, 33, 65 viewing 105 on hold 40 ring tones 28, 29, 30 Digital rights management, see phone calls 17 searching 33...
Page 155
18 ring tones 50 GPS PIN 117 setting One Touch PTT 41 sharing items 68 GPS, see GPS Enabled turning off One Touch PTT 42 status icons 64, 68 International numbers 41 Tell-A-Friend 69 storing 35 Handset, see phone...
Page 156
66 Message notifications 54 Keypad 1 memory 67 setting options 54 locking 117 pictures 64 Messages 54 renaming 66 see also voice mail, Text Language 115 messages viewing 62 LINC ID receiving 54 Memo 47 contacts type 28 Modem...
Page 157
Patent information 142 editing 121 downloading 50 Pauses switching 119 DRM 50 dialing 41 temporary 120 in Contacts 28, 29, 30, 49 storing 34 viewing 119 memory 50 Phone 1, 8 Programming, over-the-air 7 off 48 active line 115 PUK code 13...
Page 158
Text messaging, see Text Send key 1 Status messages 127 messages Service provider 16 Themes 111 Service, activating 6 Trademark information 142 T9 Text Input, see text entry Settings 114 TTY calls 45 Talkgroups 42 resetting 118 baud rate 46 joining 42 Shortcuts...
— almost • Let the person you are speaking with know you anywhere, anytime, wherever wireless phone are driving; if necessary, suspend the call in service is available and safe conditions allow.
Page 161
Do not let these features distract you from driving. Use them only when it is safe to do so. • Use your wireless phone to call for help. Dial 9-1-1 or other local emergency number in the case of fire, traffic accident or medical emergencies.