Sealey VS2077 Quick Start Manual

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to Wear eye
instructions protection
1. SAFETY
‰ WARNING! Ensure Health and Safety, local authority and general workshop practice regulations are adhered to when using tools.
‰
WARNING! Always use caution when working around fuel systems. The fuel in the fuel rail may be pressurised even if the engine
is not running.
IMPORTANT: These instructions are provided as a guide only. Always refer to the vehicle manufacturer's service instructions, or a
proprietary manual, to establish the current procedure and data, also any warnings or cautions particular to the vehicle.
DO NOT use the set if any parts are missing or damaged.
8
DO NOT use this tool for any purpose other than that for which it is designed.
8
Switch off the vehicle's ignition and disconnect the battery before commencing work under the bonnet.
9
DO NOT lay tools on the vehicle's battery. This may short the terminals together, causing harm to yourself, the tools, or the battery.
8
Operate in a well ventilated area. DO NOT inhale fuel vapours.
9
Wear approved eye protection. A full range of personal safety equipment is available from your Sealey stockist.
9
Wear suitable clothing to avoid snagging. DO NOT wear jewellery and tie back long hair.
9
Keep children and other unauthorised persons away from the working area.
9
Keep yourself, tools, and test equipment away from hot engine parts.
9
Always keep a fire extinguisher that is suitable for fuel/electrical/chemical fires close by.
9
DO NOT smoke or have open flames near vehicle.
8
Cover fuel line fittings when connecting or disconnecting fuel lines to guard against high pressure leaks. Avoid contact with fuel.
9
Clean up all fuel spills immediately and dispose of all waste according to local regulations.
9
Maintain the tool components in good and clean condition for best and safest performance.
9
When work on the vehicle is finished, ensure all connections on the vehicle are restored, and that there are no tools left in the engine bay.
9
Replace tools in the carrying case and store in a safe, dry, childproof location.
9
2. INTRODUCTION
Suitable for Ford EcoBlue 2.0L engines. Extracts diesel two-piece injectors easily without damaging the injector or head. Equivalent to OEM
303-1690, 303-1690-01.
3. CONTENTS
Item Part No. Description
1. VS2077-01 Pulling Spindle
2. VS2077-02 Support Sleeve (A)
3. VS2077-03 Removal Socket
4. VS2077-04 Support Sleeve (B)
5 VS2077-05 Shoulder Nut c/w Bearing
© Jack Sealey Limited
FORD ECOBLUE 2.0L - DIESEL INJECTOR
PULLER
MODEL NO:
Wear protective Wear Safety
Gloves
Footwear
Original Language Version
VS2077
Wear protective
Clothing
3
4
2
5
1
VSE2077 Issue 1 04/11/2022