GENERAL
This chapter provides information for the mechanical and electrical
installation of the modem.
ELECTRICAL INSTALLATION
The rear panel (Figure 2-1) includes connectors for the DTE cable and
telephone lines.
AC Power Connection
Power is supplied through a 6-foot line cord with a grounded 3-wire
plug. If common ground is available through the third prong of the
plug, a separate ground wire is not required.
DC Power Connection
Caution
To protect the DC to DC converter from damage, ensure the
positive and negative leads are properly connected.
If the modem is equipped for dc power input, connect 12 to 60 VDC
power to the terminal block attached to the modem back panel. A
chassis ground connection is also supplied on the terminal block.
Figure 2-1 Rear Panel Connections
V.3400
Chapter 2
Installation
2-1