4. Initial Settings
This chapter explains how to set the initial settings on the Web Browser for Initial Settings.
Note: When one or more AE-50 controllers are connected, all initial settings must be made on each AE-50's Web browser.
Important
● If the system is connected to a TG-2000A, make or change all settings from the TG-2000A so that the data in the
TG-2000A and AE-200 will match.
● Any control (such as interlock control or Peak Cut control) between the outdoor and indoor units connected to the AE-200
and the AE-50, as well as between the units connected to different AE-50 controllers, cannot be performed.
WT07138X01
11