Welding Power Source And Wire Feeder - Panasonic YD-200KR Operating Instructions Manual

CONNECTION (CONTINUED)
 Welding Power Source and Wire Feeder
Caution
Be sure to use this power source in combined with a specified feeder.
Welding is not allowed with a non-specified power source or when combined with a non-specified
wire feeder. Erroneous use may damage the equipment.
① Turn off the
switch.
②Align a guide, insert,
and fix with a ring screw.
Welding Torch
⑤Connect a gas
hose to a gas
outlet fitting.
Tips
For handling of the wire feeder and welding torch, read their respective instruction
manual.
POWER
Ring Screw
Gas outlet
fitting
③Insert into a CC
fixture
④Align a guide, Insert, connect.
and fix with a ring screw.
Wire Feeder
Locking Bolt
Confirm that
it does not
to
come off,and
fix
６
PREPARATIONS
Guide
Align
the guide
Output cable (connect to the
plus terminal of the welding
power source)
Gas hose
(Connect to the
gas regulator)
CC Fixture