SA-WX9000F/WXF9000
2-9.
SUB LED BOARD, FRONT PANEL ASSY
bottom side
two slits
front panel block
front side
soft cloth, etc.
top side
5 While moving the jig in the direction
of the arrow, remove four bosses.
4 Insert the jig into the space and
slowly remove the front panel
block.
Note 1: When using a jig, please
work carefully so as not
to damage the front
panel block and
speaker cabinet.
left side
bottom side
total four bosses
front panel block
12
1 Insert a flat-head screwdriver into
the two slits on the bottom of the unit,
and open a gap between the front
panel block and speaker cabinet.
top side
speaker cabinet
front panel block
top side
front side
6 Remove the front panel block
in the direction of the arrow.
9 SUB LED board
Note 3: When installing the SUB LED board,
align the two bosses and two holes.
3 While moving the jig in the direction
of the arrow, remove four bosses.
2 Insert the jig into the space and slowly
remove the front panel block.
Note 1: When using a jig, please work
carefully so as not to damage
the front panel block and
speaker cabinet.
front side
total four bosses
0 front panel assy
Note 2: When installing the front panel assy,
peel off the used bond and apply a new
bond, then install the front panel assy.
7 SK1 SUB MAIN
board cable
connector
(CN7000)
hole
8 two screws
(BVTP3
8)
right side
bottom side
hole
two
bosses