•
Loosen the M8 hexagon bolt at the bottom of the wall mount (
(
) and separate the mount arm from the wall plate.
2.
Remove the slide plate from the 3-axis adjustment unit.
•
Remove the M4 x 12 mm hexagon socket head cap bolts (x2) (
•
Remove the slide plate from the 3-axis adjustment unit (
M4 x 12 mm hexagon
socket head cap bolts
(x2)
B
Assemble the parts
1.
Assemble the wall plate.
Assemble the three plates into one unit, and secure them with the M4 x 12 mm hexagon socket head
cap bolts (x6) supplied.
M4 x 12 mm hexagon socket head cap bolts
Washer
Spring washer
Hexagonal shaft
).
.
24
), then tilt the hexagonal shaft
M8 hexagon bolt
Slide plate