F
Attach the mount arm to the wall plate
1.
Insert the hexagonal shaft at the top of the mount arm into the slot on the wall plate (
2.
Insert the M8 hexagon bolt at the bottom of the mount arm into the wall plate (
Caution
Take care not to trap the cables between the mount arm and wall plate.
3.
Secure the mount arm to the wall plate by tightening the supplied M6 x 20 mm cross recessed head
shoulder screws (x3) with the No.3 cross-head screwdriver (
M6 x 20 mm cross recessed
head shoulder screws (x3)
Hexagonal shaft
M8 hexagon bolt
).
30
).
).