Connecting An S-Video Source - Epson PowerLite 1700c User Manual

Connecting to Computers and Other Equipment
38

Connecting an S-Video Source

1. Locate an S-Video cable (one is usually provided with your video
equipment or you can purchase one from Epson; see page 10).
2. Connect the cable to the S-Video connector on your player and
the connector on the projector:
S-Video
3. If you want to play sound through the projector, see page 40 for
instructions on connecting audio cables.
4. If you don't need to make any other connections, see page 15 or
the Quick Setup sheet for instructions on turning on the projector
and adjusting the image. Once the projector is turned on, select
the image source: press the
or press the
Source Search
panel repeatedly until the image appears.
button on the remote control
Search
button on the projector's control