note
Because of the different
technologies used, your
projected image may not
exactly match the colors on
your notebook or computer
monitor.
Solving Problems
76
2. Adjust the
Tracking
3. Adjust the
Sync
The image is too light or dark, or colors are incorrect.
■
If you're displaying a computer image, use the
option in the projector's Image menu to adjust the color (see
page 46).
If you're displaying video, adjust the
■
settings on the Image menu. You can also try
Color Mode
adjusting the
Color Saturation
settings on the Image menu.
Try adjusting the
■
Brightness
menu.
Check your computer display settings to correct the color balance.
■
■
The projector's lamp may need to be replaced. See page 62 for
instructions.
There is no sound, or the sound is not loud enough.
Press the
button on the projector or remote control to increase
■
the volume.
Make sure A/V Mute is not enabled. (The
■
have been pressed.)
■
Make sure the A/V Mute Slide is open.
to eliminate vertical bands.
setting to increase the image sharpness.
Color Adjustment
,
ABS Color Temp
and
Contrast
A/V Mute
Color Mode
and
, and
Tint
settings on the Image
button may