Problems And Solutions; Power Problems - Epson P-4000 User Manual

Error message
Some errors occurred
while deleting files. The
operation was canceled.
There is no response from
the printer.
You must set the date and
time to ensure correct
operation.
Description
Some files were skipped. The
memory card may be
write-protected. Check the
memory card and try again.
Make sure the USB cable is
connected correctly. Check your
printer.
Set the correct date and time.
(See page 51.)
Wait until the P-4000 cools
down.
The battery power is running
out. Charge the battery. See
"Charging the Battery" on
page 10 for details.
Press the Reset button. See
"Resetting the P-4000" on
page 57 for instructions.

Problems and Solutions

Use the information in this section to diagnose problems
and find solutions.

Power Problems

The power does not turn on.
Cause
The battery has run out.
The battery is not installed
correctly.
The P-4000 may have shut
off automatically to save
battery power.
What to do
When the icon appears on
the top right corner of the LCD,
the battery has run out. See
"Charging the Battery" on page 10
and charge the battery.
Make sure the battery is installed
correctly. See "Installing the
Battery" on page 9.
Slide the power switch down to
turn the P-4000 back on.
Maintenance and Troubleshooting 54