ACLinux, 49 means ACLinux 4.9 and D means Desktop version II. {PLF_IF} is Platform Information; e.g. NV03 III. {PJ_IF} is Project Information; e.g. BOXER-8222AI-B IV. {BN} is Build Number; e.g. 0,1,2,…,N 2) Prepare one host PC which has x86 architecture 3) Install Ubuntu 16.04 or 18.04 on the host PC...
1.2. On Linux Host 1) Unzip image compression file on the Ubuntu host PC $ tar zxvf ACLinux_4.9_{OS_IF}.{PLF_IF}.{PJ_IF}.{BN}.tar.gz 2) Connect the host PC and the carrier board via the microUSB cable 3) Press and hold down the recovery button and then connect the power supply.
2. To Flash Image 2.1. Flash Image to Board 1) Type [Ctrl] + [Alt] + [t] to open a terminal on the host PC 2) Enter the bootloader folder that you unzip 3) Execute script to flash image $ sudo ./flashall.sh 4) Wait until the flashing process completes...