JVC AV-27D303 User Manual page 15

Cable and VCR Connections - Continued
Diagram #2
1) Connect the antenna or cable TV wire from the wall outlet, in to the RF Input of the cable
box.
2) Connect an RF cable from the RF Output of the cable box, in to the RF Input on the back of
the VCR.
3) Connect an RF cable from the RF Output of the VCR, in to the RF Input on the back of the
TV.
4) Connect the yellow video cable out from the VCR's Video Output, in to the TV's Video Input
jack, OR connect an S-Video cable from the VCR's S-Video output, to the TV's S-Video
input.
5) Connect the white audio cable out from the VCR's Left Audio Output, in to the TV's Left
Audio Input Jack.
6) Connect the red audio cable out from the VCR's Right Audio Output, in to the TV's Right
• If your VCR is a mono sound unit, it will have only one Audio Out jack. Connect it to the TV's
Left Audio Input.
• Please consult your VCR's owner's manual for more information on its operation.
Downloaded from: https://www.usersmanualguide.com/
CABLE or ANTENNA
INPUT 1 INPUT 2
COMPONENT
S-VIDEO
VIDEO
OVER
VIDEO/Y
VIDEO
AUDIO OUT
AUDIO
L/MONO L/MONO
P
B
L
P
R R R
R
Audio Input jack.
WALL
OUT
OUT IN
IN
75Ω
(VHF/UHF)
OUT
Connections
CABLE BOX
VCR
V L R
OR
Illustration of AV-27D303
15