Replacing Other Electrical Components - LG LWD3081ST Training Manual

WALL OVEN

REPLACING OTHER ELECTRICAL COMPONENTS

WARNING! Electric shock hazard. The oven must be disconnected from the power
supply when making repairs and adjustments.
WARNING! Cut hazard. Many of the panels and sheet metal parts of the oven have
exceptionally sharp edges. Handle them with extreme caution. We
recommend wearing assembly gloves or some other type of safety hand
protection.
WARNING! Weight hazard. The double oven weighs over 250 pounds. Use care when
lifting the oven. Do not allow it to fall from its cabinetry. We recommend
using at least two people to lift the oven. A special dolly is available to
assist with removal and replacement of the oven.
In the following sections, it is necessary to remove the oven from its cabinetry.
Depending upon the components being serviced, various levels of disassembly will be
required. Use care, and be very careful of sharp edges.
LWD3081ST
To service the controls, remove the oven
far enough to remove the control covers.
Be careful the oven does not fall from its
cabinetry, as it weighs over 250 pounds.
It might be best to remove the oven
completely and set it on the floor.
Remove the 13 screws that secure the
three sections of the top cover.
The vent motor, the thermal limiter for the
cooling fan, and the door switch (top oven)
can be serviced here.
Page 20
TRAINING MANUAL
TRAINING MANUAL