Table of Contents
Advertisement
WARNING
Use the console drawer only under the specified environment.
Do not install the server rack in any environment that is not suitable for installation.
Installation in an unsuitable environment is harmful for the console drawer and other
systems installed in the rack and may cause fire or personal injury due to the rack falling.
For a detailed explanation on installation environments or seismic reinforcement, consult
with the instruction manual supplied with the rack or your maintenance service company.
Use a rack that conforms to the designated standard.
The console drawer can be mounted onto a rack for the Express server that conforms
to EIA standards. Do not mount the console drawer onto any rack that does not conform
to EIA standards. Doing so may cause a device malfunction, personal injury, or damage
to peripheral devices. For more information about racks that can be used with the
console drawer, consult with your maintenance service company.
Power supply and power cord use
CAUTION
Plug in to a proper power source.
Use a grounded outlet with the specified voltage. Use of an outlet with a voltage other
than that specified causes fire and electrical leakage. Do not install the console drawer in
any environment that requires an extension cord. Connecting to a cord that does not
conform to the power supply specs of the console drawer causes overheating, resulting
in fire.
Do not connect many cords into a single outlet by using extension cords.
The electric current exceeding the rated flow overheats the outlet, which may cause a
fire.
Secure the power plug into the outlet.
Insert the plug of power cords into the outlet completely. Arc tracking may be caused by
inserting the plug halfway and the possibility of fire is increased.
Do not use any unauthorized power cord.
Use only the power cords authorized by NEC. Electric current that exceeds the amount
allowed could cause fire. Also, observe the following precautions to prevent electrical
shock or fire caused by a damaged power cord.
• Do not stretch the cord harness.
• Do not pinch the power cord.
• Do not bend the power cord.
• Keep chemicals away from the power cord.
• Do not twist the power cord.
• Do not place any object on the power cord.
• Do not step on the power cord.
• Do not alter, modify, or repair the power cord.
• Uncoil the power cord before use.
• Do not use a damaged power cord. Replace
• Do not secure the power cord
the damaged power cord with a power cord
with staples or equivalents.
of the same standard. Contact your sales
representative for replacement.
Do not unplug the power cord by holding the cable part.
Pull the power cord straight out by holding the plug. Pulling the power cord by holding the
cable part or applying extra pressure to the connector may damage the cable part, which
may cause a fire or electric shock.
WARNING
Do not hold the power plug with a wet hand.
Do not disconnect/connect the plug while your hands are wet. Failure to follow this
warning may cause an electric shock.
Do not connect the ground wire to a gas pipe.
Never connect the ground wire to a gas pipe. Failure to follow this warning may cause a
gas explosion.
Installation, relocation, storage, and connection
CAUTION
Do not install the console drawer in other than the specified place.
Do not install the console drawer in the following places or any place other than specified
in User's Guide. Failure to follow this instruction may cause a fire.
•A dusty place
•A humid place such as near a boiler
•A place exposed to direct sunlight
•An unstable place
Do not use the console drawer in an environment where corrosive gas is present.
Do not install the console drawer in a place subject to corrosive gases including sulfur
dioxide, hydrogen sulfide, nitrogen dioxide, chlorine, ammonia, or ozone. Do not install
the console drawer in an environment that contains dust, chemicals that accelerate
corrosion such as NaCl or sulfur, or conductive materials. Failure to follow this warning
may cause the wiring on the printed wiring board to short-circuit, leading to fire. If you have
any questions, contact your sales representative.
Use only the specified interface cable.
Use only interface cables provided by NEC and locate a proper device and connector
before connecting a cable. Using an unauthorized cable or connecting a cable to an
improper destination may cause a short circuit, resulting in a fire. Also, observe the
following notes on using and connecting an interface cable.
•Do not use any damaged cable.
•Do not place any object on the cable.
•Do not use any damaged cable connector.
Do not connect or disconnect any interface cable with the power cord of the console
drawer plugged to a power source.
Be sure to power off the console drawer and unplug the power cord from a power outlet
before installing/removing any optional internal device or connecting/disconnecting any
interface cable to/from the console drawer. If the console drawer is off-powered but its
power cord is plugged to a power source, touching an internal component, cable, or
connector may cause an electric shock or a fire resulted from a short circuit.
Cleaning and working with internal devices
CAUTION
Secure cables or cords in place.
Be sure to secure the power cord, interface cables, and cards in place. Incomplete
installation causes a loose connection, resulting in smoke or fire.
WARNING
Do not disassemble, repair, or alter the console drawer.
Never attempt to disassemble, repair, or alter the console drawer on any occasion except
as described in User's Guide. Failure to follow this warning may cause not only
malfunction of the console drawer but also an electric shock or fire.
Disconnect the power plug before cleaning the console drawer.
Be sure to power off the console drawer and disconnect the power plug from a power
outlet before cleaning or installing/removing internal optional devices. Touching any
internal device of the console drawer with its power cord connected to a power source
may cause an electric shock even of the console drawer is off-powered.
Occasionally disconnect the power plug from the outlet and clean the plug with a dry cloth.
Heat will be generated if condensation is formed on a dusty plug, which may cause a fire.
During operation
•Do not step on the cable.
• Do not use the console drawer with
loose cable connections.
Warning labels
Warning labels are attached on or near the components with potential hazards to draw attention from
users to potential hazards involved in handling the console drawer. (Do not remove or black out these
labels and keep them clean). If no labels are attached or printed on the console drawer, or if there is a
label coming off or stained, contact your sales representative.
Transfer, Movement, and Disposal
Transfer to a third party
When transferring (or selling) the console drawer to a third party, be sure to provide this manual (including
electronic data) to the third party.
Disposal of the console drawer
Dispose of the console drawer according to laws and regulations of the central and/or local government.
Regulatory Notice
FCC Statement
Note：This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference
at his own expense.
Tips for your health and safety
Using a computer extensively may affect different parts of your body. Here are tips you should
follow while working on a computer to minimize strain on your body.
Keep proper posture
Adjust the angle, brightness, and contrast of
the display to suit your preferences
Refer to the online document "User's Guide" for descriptions and notes about correctly
using the console drawer.
CAUTION
Do not leave the console being pulled out.
Bumping the console may cause personal injury.
Do not use without locking the slide rails.
When using the console, pull out the console until the slide rails are locked.
When storing the console, close the LCD first and unlock the slide rails, then store the
console into the rack.
Avoid contact with the console drawer during thunderstorms.
Do not touch any part of the device including the cables when a thunderstorm is
approaching.
Also, do not connect or disconnect any devices. There may be a risk of electric shock
from lightning strike.
Keep animals away from the console drawer.
Keep animals such as pets away from the console drawer. Pet hair or other waste enters
the console drawer, which may cause a fire or electric shock.
Do not remove the console drawer from the rack while it is running.
Do not pull out or remove the console drawer from the rack while the console drawer is
running. In addition to causing equipment to not function properly, separating the console
drawer from the rack may result in personal injury.
Do not place any unnecessary object on top of the console drawer.
Keep unnecessary object (e.g., cup or glass of drink) away from the console drawer.
Doing so may cause an electric shock or a fire if such a liquid enters the console drawer.
Adjust the angle of keyboard
Take a break.
Light exercise is also recommended
To Be Continued➟➟➟
Advertisement
Table of Contents
