Sharp VC-A10 Service Manual

Table of Contents

Quick Links

VC-A500

VC-A10/A10S/A50/A50S/

A50S(B)/A60/A75/A80S

1. SPECIFICATIONS ................................................................................................................. 2

2. DISASSEMBLY AND REASSEMBLY ................................................................................... 3

3. FUNCTION OF MAJOR MECHANICAL PARTS ................................................................... 6

4. ADJUSTMENT, REPLACEMENT AND ASSEMBLY OF MECHANICAL UNITS .................. 9

5. ELECTRICAL ADJUSTMENT ............................................................................................. 28

6. MECHANISM OPERATION FLOWCHART AND TROUBLESHOOTING GUIDE............... 31

7. TROUBLESHOOTING ........................................................................................................ 37

8. BLOCK DIAGRAM ............................................................................................................... 45

9. SCHEMATIC DIAGRAM AND PWB FOIL PATTERN ......................................................... 55

10. REPLACEMENT PARTS LIST ............................................................................................ 68

11. EXPLODED VIEW OF MECHANICAL PARTS ................................................................... 77

12. PACKING OF THE SET ...................................................................................................... 82

SERVICE MANUAL

VC-A10/A10S

VC-A50/A50S/A50S(B)

VC-A500

VC-A60

VC-A75

VC-A80S

MODELS

In the interests of user-safety (Required by safety regulations in some countries) the

set should be restored to its original condition and only parts identical to those

specified be used.

CONTENTS

SHARP CORPORATION

VIDEO CASSETTE PLAYER

VC-A10/A10S/A500

VC-A50/A50S/A50SB

VC-A60/A75/A80S

S62L3VC-A10//

Page

Table of Contents

Troubleshooting

Summary of Contents for Sharp VC-A10

Page 1: Table Of Contents
VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S SERVICE MANUAL S62L3VC-A10// VIDEO CASSETTE PLAYER VC-A500 VC-A10/A10S VC-A50/A50S/A50S(B) VC-A500 VC-A10/A10S/A50/A50S/ VC-A60 A50S(B)/A60/A75/A80S VC-A75 VC-A80S MODELS In the interests of user-safety (Required by safety regulations in some countries) the set should be restored to its original condition and only parts identical to those specified be used.
Page 2: Specifications
Video recording system: Rotary, slant azimuth two heads helical scan system Video signal: PAL colour or monochrome (CCiR system B/G) signals Maximum Recording/playing time: 240 minutes max. with SHARP E-240 tape at SP mode) 480 minutes max. with SHARP T-160 tape (NTSC: EP mode) Tape width: 12.7mm...
Page 3: Disassembly And Reassembly
VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S 2. DISASSEMBLY AND REASSEMBLY 2-1 DISASSEMBLY OF MAJOR BLOCKS : Remove 2 screws 1. TOP CABINET : Remove 2 screws 2 and 7 clips 3. FRONT PANEL : Remove 2 screw 4, 2 screws 5. MECHANISM/ Remove 2 screws 6 with antenna...
Page 4 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S 2-2 DISASSEMBLING THE MECHANISM 2. Removing the mechanism and cassette housing. 1. When removing the mechanism from the set. Remove 2 screws 3 fixing the cassette housing to the Remove the screw 2 which connecting the PWB and mechanism, and remove the cassette housing.
Page 5 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S 2-3 CARES WHEN REASSEMBLING Rotate the flange of worm gear by using thin stick. INSTALLING THE CASSETTE HOUSING CW • • • Loading direction When the cassette housing is installed on the mechanism, CCW • • • Ejection direction the initial setting is essential condition.
Page 6: Function Of Major Mechanical Parts
VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S 3. FUNCTION OF MAJOR MECHANICAL PARTS (TOP VIEW) Function Function Full erase head Reverse guide lever ass’y Supply pole base ass’y Reel relay gear Tension arm Take-up reel disk Idler wheel ass’y Pinch roller lever ass’y Open guide...
Page 7 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S FUNCTION OF MAJOR MECHANICAL PARTS (BOTTOM VIEW) (except VC-A50S) Function Function Syncro Gear Clutch lever Master cam Limiter pulley ass’y Capstan D.D. motor Shifter Reel belt...
Page 8 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S FUNCTION OF MAJOR MECHANICAL PARTS (BOTTOM VIEW) (VC-A50S) Function Function Syncro Gear Clutch lever Master cam Limiter pulley ass’y Capstan D.D. motor Shifter Reel belt DM/LM FFC Holder...
Page 9: Adjustment, Replacement And Assembly Of Mechanical Units
VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S 4. ADJUSTMENT, REPLACEMENT AND ASSEMBLY OF MECHANICAL UNITS The explanation given below relates to the on-site general service (field service) but it does not relates to the adjustment and replacement which need high-grade equipment, jigs and skill. For example, the drum assembling, replacement and adjustment service must be performed by the person who have finished the technical courses.
Page 10 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S 4-2 MAINTENANCE CHECK ITEMS AND EXECUTION TIME Perform the maintenance with the regular intervals as follows so as to maintain the quality of machine. 1000 1500 2000 Possible symptom Maintained Remarks hrs. hrs. hrs. hrs. encountered Parts Abnormal rotation or significant Guide roller ass’y...
Page 11 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S 4-3 REMOVING AND INSTALLING THE CAS- 2. Install in the reverse order of removal. SETTE HOUSING Notes • Removal 1. In the case when you use the magnet screw driver, never 1. In the cassette removing mode, remove the cassette.
Page 12 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S 4-5 REEL DISK REPLACEMENT AND HEIGHT Notes: CHECK 1. When installing the reel disk, take due care so that the • Removal tension band ass'y is not deformed and grease does no 1. Remove the cassette housing control assembly.
Page 13 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S Note: Notes: Whenever replacing the reel disk, perform the height check- 1. Hold the torque gauge by hand so that it is not moved. ing and adjustment. 2. Do not keep the reel disk in lock state. Do not allow long- time measurement.
Page 14 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S Notes: 4-9 CHECKING AND ADJUSTMENT OF TAKE- 1. Hold the torque gauge by hand so that it is not moved. UP TORQUE IN VIDEO SEARCH REWIND 2. Do not keep the reel disk in lock state. Do not allow long- MODE time measurement.
Page 15 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S 4-10 CHECKING THE VIDEO SEARCH REWIND BACK TENSION • Remove the cassette housing control assembly. • After short-circuiting between TP803 and TP802 Tension gauge Pinch roller provided at main PWB, plug in the power cord. 900 - 1,200gf •...
Page 16 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S • Checking Tension pole adjustment driver adjusting direction 1. Set a cassette tape, push the REC button to place the unit in the SP record mode. Now check the tension pole position. 2. Visually check to see if the position of the tension pole is + 0.5...
Page 17 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S • Adjustment • Checking the brake torque at the take-up side 1. If the indication of torque cassette meter is lower than the setting, shift the tension spring engagement to the part A. Torque gauge 2. If the indication of torque cassette meter is higher than the setting, shift the tension spring engagement to the part B.
Page 18 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S 3. Align the left end of gear of A/C head arm with the 4-15 REPLACEMENT OF A/C (AUDIO/CONTROL) punched mark of chassis, tentatively tighten the screws HEAD 1 so as to ensure smooth motion of A/C head arm.
Page 19 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S 4-16 A/C HEAD HEIGHT ROUGH ADJUSTMENT 4-17 ADJUSTMENT OF TAPE DRIVE TRAIN 1. Tape run rough adjustment 1 Check and adjust the position of the tension pole. • Setting (See 4-12.) 2 Check and adjust the video search rewind back Azimuth screw tension.
Page 20 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S Notes: 1. Previously set the tracking control in the center position, and adjust the ATR signal waveform to maximum with X value adjustment nut. Thereby the tape run rough ad- justment is facilitated. 2. Especially the outlet side ATR signal waveform must have higher flatness.
Page 21 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S 3 Next, press the tracking button (+), (–) and change the ATR signal waveform from max to min and from PB ATR min to max. At this time adjust the height of supply Signal and take-up side guide roller with the adjustment driver (JiGDRiVERH-4) so that the ATR signal wave- form changes nearly parallel.
Page 22 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S 4-19 REPLACEMENT OF DRUM D.D. MOTOR 4-18 REPLACEMENT OF THE CAPSTAN D.D. 1. Set the ejection mode. (DIRECT DRIVE) MOTOR 2. Withdraw the main power plug from the socket. • Remove the mechanism from the set. • Removal (Perform in numerical order.) •...
Page 23 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S 4-20 REPLACING THE UPPER AND LOWER 4-21 ASSEMBLING OF PHASE MATCHING DRUM ASSEMBLY MECHANISM COMPONENTS • Assemble the phase matching mechanism compo- • Replacement (Perform in the numerical order) nents in the following order. 1 Remove the motor as stated in 4-19 D.D. motor replace- 1.
Page 24 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S 1. Make sure that the loading arm T and S are at the Phase- 4-22 INSTALLING THE SHIFTER Matching point as shown below 2. Fix the shifter position setting part to the roading arm T Drum position setting part as shown in figure 3.
Page 25 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S 4-23 INSTALLING THE MASTER CAM (AT 4-24 REPLACEMENT OF LOADING MOTOR • Removal REAR SIDE OF MECHANISM CHASSIS) 1. Make sure beforehand that the shifter is at initial posi- Apply grease tion. (Right side from bottom view) 2.
Page 26 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S 4-25 ASSEMBLY OF CASSETTE HOUSING 1. Proof lever Proof lever spring and Holder R MSPRD0215AJFJ *Proof lever spring fixing direction designated. Figure 4-41. 2. 0pen lever, Sensor Plate and Frame R out side out side inside bottom...
Page 27 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S 4 Frame R, Frame L, Drive Arm R, Drive Arm L, Upper Plate. LANGF9661AJFW Top surface should be free from scratches or soil. When assemble drive lever to frame R, make sure the hole synchronize. Figure 4-44.
Page 28: Electrical Adjustment
VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S 5. ELECTRICAL ADJUSTMENT Notes: • Before the adjustment: Electrical adjustments discussed here are often required after replacement of electronic components and mechanical parts such as video heads. Check that the mechanism and all electric components are in good working condition prior to the adjustments, otherwise adjustments can not be completed.
Page 29 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S SERVO CIRCUIT ADJUSTMENT ADJUSTMENT OF PAL SYSTEM FV (False Vertical Sync) OF STILL PICTURE ADJUSTMENT OF HEAD SWITCHING POINT Measuring Colour TV monitor instrument Measuring Dual-trace oscilloscope instrument Colour TV monitor Mode Playback still Mode Playback Cassette...
Page 30 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S CHECKING OF PLAYBACK LEVEL CHECKING OF AUDIO RECORD LEVEL Measuring Oscilloscope Measuring AC milli-voltmeter instrument instrument Mode Record/Playback Mode Record/playback Cassette Self-recorded tape Input signal 1kHz, –8.0 dBs (See Note below 1) Test point AUDIO OUT jack 1.0 ±...
Page 31: Mechanism Operation Flowchart And Troubleshooting Guide
VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S...
Page 32 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S...
Page 33 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S...
Page 34 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S...
Page 35 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S...
Page 36 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S...
Page 37: Troubleshooting
VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S...
Page 38 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S...
Page 39 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S...
Page 40 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S...
Page 41 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S...
Page 42 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S...
Page 43 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S...
Page 44 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S...
Page 45: Block Diagram
VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S 8. BLOCK DIAGRAM POWER CIRCUIT BLOCK DIAGRAM...
Page 46 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S SYSTEM SERVO BLOCK DIAGRAM...
Page 47 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S...
Page 48 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S SIGNAL FLOW BLOCK DIAGRAM(VC-A10/A10S/A500/A50/A50S/A50S(B)/A60)
Page 49 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S...
Page 50 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S SIGNAL FLOW BLOCK DIAGRAM(VC-A75)
Page 51 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S...
Page 52 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S SIGNAL FLOW BLOCK DIAGRAM(VC-A80S)
Page 53 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S...
Page 54 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S SCHEMATIC DIAGRAM NOTES: IMPORTANT SAFETY NOTICE: 1. The unit of resistance "ohm" is omitted (k=1000 BE SURE TO USE GENUINE PARTS FOR SE- ohm, M=1 Meg ohm). CURING THE SAFETY AND RELIABILITY OF 2. All resistors are 1/8 watt, unless otherwise noted.
Page 55: Schematic Diagram And Pwb Foil Pattern
VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S 9.SCHEMATIC DIAGRAM AND PWB FOIL PATTERN OPERATION CIRCUIT...
Page 56 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S MAIN CIRCUIT(1) The functional explanation of the ter-minal of IC701. The function of each terminal of IC701 varies in the number of the terminal.(80 pin or 100 pin) Make sure the number of the terminals or a part code of IC701 in the case of the service.
Page 57 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S onal explanation of the f IC701. n of each terminal of s in the number of the pin or 100 pin) he number of the a part code of IC701 in the service.
Page 58 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S MAIN CIRCUIT(2) * VOLTAGE MEASUREMENT MODE PB ..Parentheses ( REC ... Without Parentheses...
Page 59 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S...
Page 60 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S MAIN CIRCUIT(3) * VOLTAGE MEASUREMENT MODE PB ..Parentheses ( REC ... Without Parentheses...
Page 61 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S...
Page 62 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S MAIN CIRCUIT(4) * VOLTAGE MEASUREMENT MODE PB ..Parentheses ( REC ... Without Parentheses...
Page 63 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S...
Page 64 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S SECAM CIRCUIT (VC-A60)
Page 65 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S PWB FOIL PATTERN OPERATION PWB SECAM PWB...
Page 66 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S MAIN PWB...
Page 67 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S...
Page 68: Replacement Parts List
PRINTED WIRING BOARD ASSEMBLIES Q971 VS2PB709AR/-1 V 2PB709AR Q972 VSKRC103S//-1 V KRC103S (NOT REPLACEMENT ITEM) DIODES DUNTKB110TEV1 - Main Unit (VC-A10/A10S) — D351 VHD1SS119//-1 V 1SS119 (A80S) DUNTKB110TEV5 - Main Unit (VC-A50/A50S) — D701 RH-PX0270GEZZ V PhotoDiode DUNTKB110TEV8 - Main Unit (VC-A500) —...
Page 69 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S Ref. No. Part No. Description Code Ref. No. Part No. Description Code D963 RH-EX0631GEZZ V Zener Diode C227 VCKYCY1CF104Z V 0.1 16V Ceramic D971 RH-EX0613GEZZ V Zener Diode C230 VCKYCY1CF104Z V 0.1 16V Ceramic D972 RH-EX0677GEZZ V Zener Diode...
Page 70 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S Ref. No. Part No. Description Code Ref. No. Part No. Description Code C661 VCEA9M1HW475M V 4.7 50V Electrolytic C353 VCKYCY1HF103Z V 0.01 50V Ceramic (A80S) (A80S) C663 VCEA9M1CW106M V 10 16V Electrolytic C354 VCKYCY1HF103Z V 0.01 50V Ceramic...
Page 71 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S Ref. No. Part No. Description Code Ref. No. Part No. Description Code C754 VCKYCY1HF103Z V 0.01 50V Ceramic C972 VCKYCY1HF103Z V 0.01 50V Ceramic (except A10/A10S) C5062 VCCCCY1HH101J V 100p 50V Ceramic C760 VCEA9M1CW336M V 33 16V Electrolytic...
Page 72 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S Ref. No. Part No. Description Code Ref. No. Part No. Description Code R302 VRD-RA2BE561J V 560 1/8W Carbon R658 VRS-CY1JF223J V 22k 1/16W Metal Oxide AA (A60/A80S) (A80S) R303 VRS-CY1JF392J V 3.9k 1/16W Metal Oxide AA R659 VRS-CY1JF472J V 4.7k 1/16W Metal Oxide AA...
Page 73 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S Ref. No. Part No. Description Code Ref. No. Part No. Description Code R963 VRD-RA2EE121J V 120 1/4W Carbon (A50/A50S) (except A80S) R760 VRG-SC2EB1R0J 1/4W FuseResistor AB R963 VRD-RA2EE101J V 100 1/4W Carbon R761 VRS-CY1JF222J V 2.2k 1/16W Metal Oxide AA...
Page 74 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTB205TEV1 SECAM Unit (VC-A60 only) INTEGRATED CIRCUITS IC501 VHiTA1238F/-1 V TA1238F TRANSISTORS Q504 VS2PD601AR/-1 V 2PD601AR Q505 VS2PD601AR/-1 V 2PD601AR Q506 VSKRC104S//-1 V KRC104S Q507...
Page 75 RMOTNA001WJZZ V Capstan Motor (except for VC-A50S) RMOTNA002WJZZ V Capstan Motor (VC-A50S) RMOTP1139GEZZ J Drum Drive Motor DDRMW0041TEX3 V Upper and Lower Drum Ass’y (VC-A10/A10S/A500/ A50/A50S/A50S(B)) DDRMW0041TEX2 V Upper and Lower Drum Ass’y(VC-A60) DDRMW0042TEX2 V Upper and Lower Drum Ass’y (VC-A75S)
Page 76 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S Ref. No. Part No. Description Code Ref. No. Part No. Description Code 500-10 JBTN-3164AJSA V Button, Power (A10/A50/A60/A75) CABINET PARTS 500-10 JBTN-3164AJSB V Button, Power (A10S/A50S/A50SB/A80S) GCABA3169AJSM V Top Cabinet 500-11 GCOVA2222AJZZ V R/C Cover (A10/A50/A60/A75) (except A500)
Page 77: Exploded View Of Mechanical Parts
VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S 11. EXPLODED VIEW OF MECHANICAL PARTS MECHANISM CHASSIS PARTS for VC-A50S for VC-A50S for VC-A50S for VC-A50S...
Page 78 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S CASSETTE HOUSING CONTROL PARTS...
Page 79 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S CABINET PARTS VC-A80S VC-A10/A10S VC-A50/A50S/A50SB VC-A60/A75/A500...
Page 80 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S FRONT PANEL PARTS(VC-A10/A10S/A50/A50S/A50SB/A60/A75/A80S) 500-7 500-3 500-10 500-12 500-2 500-11 500-1 500-6 PRECAUTION ON FRONT PANEL SET-UP Cassette cover Front panel Cassette housing Cassette cover open lever Cassette cover Cassette cover Cassette cover open lever open lever About 45°...
Page 81 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S FRONT PANEL PARTS(VC-A500) 500-7 500-3 500-1 500-2 500-11 500-6 500-4 PRECAUTION ON FRONT PANEL SET-UP Cassette cover Front panel Cassette housing Cassette cover open lever Cassette cover Cassette cover Cassette cover open lever open lever About 45°...
Page 82: Packing Of The Set
VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S 12. PACKING OF THE SET Setting position of the Knobs Accessories TiNS-A013WJZZ Operation Manual (VC-A10/A10S) TiNS-A015WJZZ Operation Manual (VC-A50/A50S/ A50SB) TiNS-A017WJZZ Operation Manual (VC-A500L) TiNS-A018WJZZ Operation Manual (VC-A60) TiNS-A019WJZZ Operation Manual (VC-A75) TiNS-A020WJZZ Operation Manual (VC-A80S) RRMCGA040WJSA (VC-A10/A10S)
Page 83 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S...
Page 84 VC-A10/A10S/A500 VC-A50/A50S/A50SB VC-A60/A75/A80S © COPYRIGHT 2002 BY SHARP CORPORATION ALL RIGHTS RESERVED. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher.

This manual is also suitable for:

Vc-a10s Vc-a500 Vc-a50 Vc-a50s Vc-a50sb Vc-a60 ... Show all

Sharp VC-A10 Service Manual

Quick Links

Troubleshooting

Related Manuals for Sharp VC-A10

Summary of Contents for Sharp VC-A10

This manual is also suitable for:

Table of Contents