Table of Contents
Advertisement
About the Software
The IPD adjustment software and HMD configuration software will also be installed together with the HMD-VS1W driver.
(Refer to P. 18 "Initial Settings")
Before using the software, make sure to refer to "Initial Settings" (P. 18) and initialize the settings.
IPD Adjustment Software
Below are the functions for adjusting the interpupillary distance (IPD).
Note that the image may appear out of focus or it may cause strain to the eyes if the IPD is not correctly set.
Measuring the IPD in advance and applying the measurements to the settings of the IPD adjustment software helps to
deliver a more pleasant experience when using this product.
Use the IPD software after powering on this unit and launching SteamVR.
The IPD value cannot be adjusted if SteamVR is not running.
* There are different ways to measure the IPD, such as consulting an eye specialist or measuring using a ruler and
mirror.
①
⑤
A IPD Value Reset Button
Resets the IPD value to the default value (64.0 mm).
B Exit Software Button
Exits the IPD adjustment software program.
C IPD Value Display
Displays the current IPD value. (Adjustable range: 55 mm to 75 mm)
D Offset Value +/- Display
Displays the amount of increase or decrease from the default value of 64.0 mm to the current IPD value.
E IPD Decrease Button
Decreases the IPD value in 0.5 mm intervals.
F IPD Increase Button
Increases the IPD value in 0.5 mm intervals.
22
④
②
③
⑥
Advertisement
Table of Contents
