Table of Contents
Advertisement
Servicing of the HMD Unit
Always keep the product clean.
0
Because lenses such as half mirrors are coated, rubbing with a hard object may cause scratches.
0
If the product becomes dirty, follow the procedure below.
0
1) Blow off the dust on the surface
Use a manual pump-type air blower or a soft-bristle brush for lenses to remove dust on the surface.
Do not use a spray can type air duster. The gas may affect the performance of this product.
As with glasses, you don't have to worry about fine small dust.
2) Removing Contaminates
Use a clean, soft cloth or a lens cleaning cleaning paper lightly moistened with IPA (isopropyl alcohol) with a
purity of 90% or higher.
When cleaning, wipe from the center to the outside with a light force. If you rub it too hard, it may be scratched.
To replace the half-mirror, please contact our service center.
0
Replace the consumable parts periodically.
0
For purchase of consumable supplies, please consult our authorized dealer or customer service center.
0
27
Advertisement
Table of Contents
