Panasonic TX-42LZ1500B Operating Instructions Manual page 17

Connecting Bluetooth
Registering Bluetooth
This TV supports Bluetooth
Bluetooth devices that have been registered (paired)
®
with this TV can connect to (communicate with) this TV.
When registering (pairing) a Bluetooth
≥
this TV, move the device within 50 cm of the TV.
It is not possible to register (pair) Bluetooth
≥
that are not compatible with this TV.
≥ If a Bluetooth ® enabled device that you have
registered (paired) with this TV is then registered and
used on another device, it may then be made
unavailable for use with this TV. Register the device
on this TV again if this occurs.
≥ You can register Bluetooth
support A2DP on this TV. Due to the characteristics of
wireless technology, there will be some delay between
the playback of video and audio.
A maximum of 2 audio devices that support A2DP can
≥
be used simultaneously. To use 2 devices, set [Dual
Audio] (Setup > Bluetooth Setup > Bluetooth Audio
Settings) to [On], and then connect the second device.
For details, refer to [eHELP] (Search by Purpose >
≥
Functions > Bluetooth devices).
Registering the remote control
(supplied)
Either Bluetooth wireless technology or the infrared
®
communication function can be used for the
transmissions between the TV and the remote control.
Since voice controls (p. 20) use Bluetooth
technology, the remote control needs to be registered
(paired) with the TV.
≥ When using the remote control for the first time after
purchase, when you press any button while pointing
the remote control at the remote control signal
receiver with batteries inserted, the remote control is
automatically registered (paired).
When registering, face the remote control at the
≥
remote control signal receiver on the TV, within about
50 cm.
Registration may not be completed correctly if the
≥
batteries in the remote control are running low.
Remote control signal receiver
devices
®
devices
®
communications.
®
device with
®
® devices
® audio devices that
® wireless
∫ If registration fails
If registration (pairing) is not completed properly, try
registering again.
1
Display the menu bar and select [Main Menu], and
then select [Setup]
Main Menu
1 select
2 access
2
Select the remote control setting menu in [System
Menu]
3
Select [Pairing]
The registration screen is displayed, so follow the
≥
on-screen instructions to register.
∫ When the remote control does not respond
1
Press and hold the buttons shown below
simultaneously for about 3 seconds
2
Point the remote control at the remote control signal
receiver and follow the procedure below to deregister
(unpair) the remote control
[Main Menu]
Menu] [Remote Control Settings]
3
Register (pair) the remote control again
registration fails" (p. 17)
For details, refer to [eHELP] (Search by Purpose >
≥
Functions > Voice Control > Settings).
Note
If the remote control is not registered (paired) with the
≥
TV, they communicate via infrared. Face the remote
control at the TV's remote control signal receiver for
operation when infrared communication is used.
Please note that voice controls will not be available.
If the remote control is registered (paired) with the TV,
≥
they communicate via Bluetooth
face the remote control at the TV's remote control
signal receiver when Bluetooth
used. Please note, however, that you will need to face
the remote control at the remote control signal
receiver for operation when turning on or off the TV.
Setup
[Setup] [System
[Unpair]
"If
® . You will not need to
communication is
®
English
17