Panasonic TX-42LZ1500B Operating Instructions Manual page 20

∫ Remote Control Mode Error
When the TV receives a signal with a different remote
control mode to the mode that is set on the TV five times,
Remote Control Mode Error is displayed.
Follow the on-screen instructions.
≥
When all settings are initialised by performing
≥
[Shipping Condition], the TV's remote control mode is
reset to mode 1. If you cannot operate the TV with
your remote control, press and hold [OK]/[MUTE]/[1]
buttons for at least 3 seconds to set the remote control
to mode 1.
∫ Remote Control Mode Reset
You can make a forced reset of the TV's remote control
mode to change to mode 1.
1
Get another Panasonic remote control whose remote
control mode has been set to 1
2
Point the remote control at the TV, then press the
MUTE button for about 15 seconds
3
When a screen asking you to confirm the forced reset
of the remote control mode is displayed, press the
MUTE button again for about 3 seconds
20
English
Voice controls
The TV recognizes speech when you talk into the voice
control microphone, enabling you to perform operations
such as changing TV channels, adjusting the volume,
searching for programmes, and doing internet searches.
If the remote control is not registered (paired) with the
≥
TV, register (pair) the remote control.
≥ Google Assistant and Amazon Alexa functions may be
currently under consideration for a future release in
your region. They will be made available when they
become ready for release.
Google Assistant and Amazon Alexa functions may
≥
not be available in certain countries or regions or for
certain broadcasters.
The TV needs to be connected to the internet in order
≥
to perform searches, etc.
The effective range for voice controls depends on the
≥
viewing environment.
Operation may not be correct depending on the type
≥
of voice the person has and the way they speak, as
well as the surrounding environment and conditions.
When other Bluetooth
≥
same time, voice controls may not work properly
depending on the connected devices.
Selecting the voice service (when it is not selected)
1
Press the voice control button
2
Selects the voice service for voice control function.
Only one voice service can be used with the TV.
≥
The voice service selection screen can also be
≥
displayed via [Voice Control] on the menu bar.
Controlling with your voice
1
Press the voice control button
2
Speak into the voice control microphone
≥ For information about settings and operations for
voice controls, refer to [eHELP] (Search by Purpose >
Functions > Voice Control).
≥ Functions of voice control and voice services are
subject to change without notice.
(p. 17)
(p. 14)
devices are connected at the
®
Voice control
microphone