Panasonic KX-TG2720S Description

2.4ghz expandable cordless phone system

Hide thumbs Also See for KX-TG2720S:

Download this manual

This document is a text description of the control panel

layout for the product listed below.

"PDF" files of the complete operating instructions are

available

from

the

Customer

Support

section

www.Panasonic.com.

If you need the operating instructions in an alternate

format, please request it from Customer Support.

Model Number KX-TG2720S

2.4GHz Expandable Cordless Phone System

Handset

With the handset facing you, the antenna is a narrow 2 inch long protrusion at the top right. Just below the

top on the front of the handset is a shallow oval concave. This is the earpiece. The smooth surface below

the earpiece is the display, its upper edge is defined by a small ridge in the center of the handset below the

earpice. Below the display are 3 soft keys. Each soft key is used to select a function displayed directly

above it. "LINE 1" is displayed above the left soft key. The left key works as LINE 1 key. "LINE 2" is

displayed above the middle soft key. The middle key works as LINE 2 key. In the center below these keys

is the NAVIGATOR control. The surface of the NAVIGATOR control is concave and circular. This

control has four active areas that are the 12 o'clock, 3 o'clock, 6 o'clock and 9 o'clock positions. The 12

and 6 o'clock positions are the UP and DOWN keys respectively. These are also the volume control up

and down keys during a call. The 3 and 9 o'clock positions are the right and left arrow keys respectively.

These are used to enter the directory list. The 3 o'clock position is often used as "Yes" key during

programming.

To the left of the NAVIGATOR control, a trapezoid button is the TALK button, its lower edge is defined

by a small ridge. The thin button below the TALK button is the SPEAKERPHONE button. To the right of

the NAVIGATOR control, a trapezoid button is the OFF button, its lower edge is defined by a small ridge.

The thin button below the OFF button is the HOLD button. The HOLD button is also the CLEAR,

INTERCOM or TRANSFER button.

Below these buttons is the telephone keypad laid out in the conventional telephone arrangement with a

"nib" on the 5 button. Immediately below the keypad are 3 thin buttons. The left-most one is the

CONFERENCE button. The CONFERENCE button is also the FUNCTION button. To the right of the

CONFERENCE button is the FLASH button. The FLASH button is also the CALL WAIT button. The

Page 1 The thin button below the OFF button is the HOLD button. The HOLD button is also the CLEAR, INTERCOM or TRANSFER button. Below these buttons is the telephone keypad laid out in the conventional telephone arrangement with a "nib" on the 5 button. Immediately below the keypad are 3 thin buttons. The left-most one is the CONFERENCE button.
Page 2 right-most is the PAUSE button. The PAUSE button is also the REDIAL button. The indentation just below the FLASH button is the microphone. The 2 metal ridges at the bottom of the handset are the charge contacts. The handset's Speakerphone Speaker is the circular textured area on the back of the handset. The headset jack is on the left side of the handset, parallel to the TALK button.
Page 3 REDIAL button. The REDIAL button is also the PAUSE button. Above these buttons is the telephone keypad laid out in the conventional telephone arrangement with a "nib" on the 5 button. Above the keypad, a thin button is the LOCATOR button with an indicator light to the left.