Panasonic KX-TG5771 Operating Instructions Manual page 18

Preparation
Panasonic battery performance
Operation
While in use
(talking)
While not in use
(standby)
While using the
clarity booster
feature (page 29)
Note:
L Battery operating time may be
shortened over time depending on
usage conditions and surrounding
temperature.
L Battery power is consumed whenever
the handset is off the base unit or
charger, even when the handset is not in
use. Hence the longer you leave the
handset off the base unit or charger, the
less time you may actually talk using the
handset.
L After the handset is fully charged,
displaying "Charge completed", it
may be left on the base unit or charger
without any ill effect on the battery.
L The battery level may not be displayed
correctly after you replace the battery. In
this case, place the handset on the base
unit or charger and let charge for 7
hours.
18
For assistance, please visit http://www.panasonic.com/help
Operating time
Up to 5 hours
Up to 7 days
Up to 3 hours
Wall mounting for charger
(KX-TG5777 only)
1
Drive the screws (not included) into the
wall using the wall mount template as a
guide.
2
Mount the charger (A), then slide it
down (B) and to the right (C) until it is
secure.
Wall mount template for the charger
25.4 mm
(1 inch)
25.4 mm
(1 inch)
Screws
(120 V AC, 60 Hz)
A
B
C