Leveling The Appliance - LG Studio WashTower WK X30 H A Series Installation Manual

en-us_main.book.book Page 25 Monday, January 16, 2023 3:17 PM
3
Use the provided tie strap
drain hose in place.
4
If the water valves and drain are built into the
wall, fasten the drain hose to one of the water
hoses with the provided tie strap
side on inside).
29.5 - 96 "
(75 - 244 cm)
Using the Laundry Tub to Drain
1
Clip the end of the hose into the elbow
bracket.
• Connect the elbow bracket
inches (10 cm) of the end of the drain hose.
If the drain hose is extended more than 4
inches (10 cm) beyond the end of the elbow
bracket, mold or microorganisms could
spread to the inside of the washer.
2
to secure the
b
3
(ribbed
c

Leveling the Appliance

The drum of the washer spins at very high speeds.
To minimize vibration, noise, and unwanted
movement, the floor must be a solid, level surface.
29.5 - 96 "
(75 - 244 cm)
• Using the appliance without leveling it may
• Adjust the leveling feet only as far as necessary
within 4
a
NOTE
• Before installing the appliance, make sure that
4 "
(10 cm)
How to Level the Appliance
1
Hang the end of the drain hose over the side
of the laundry tub.
Use the provided tie strap to secure the drain
hose in place.
CAUTION
cause excess vibration and noise, leading to an
appliance malfunction.
to level the appliance. Extending the leveling feet
more than necessary can cause the appliance to
vibrate.
the floor is clean, dry and free of dust, dirt, water
and oil so the appliance feet cannot slide easily.
Feet that move or slide on the floor can
contribute to excessive vibration and noise.
Position the appliance in its final location.
• Take special care not to pinch, strain, or
crush the water and drain hoses. If you have
INSTALLATION 25