Panasonic PT-F100NTE Network Manual page 19

Connecting with wireless LAN
In [Network], select the same network number as is displayed in the [WIRELESS
3
LAN] menu of the projector to connect.
Projectors powered on in the chosen network group are listed.
Select the desired projectors, and click [OK].
4
The launcher appears and the connection with the projector is established.
("Description of the launcher"
Launcher is not displayed on the projection screen.
However, in Windows Vista, Launcher is displayed if the software is installed.
• Easy Wireless Set Up cannot be made between the projector and the computer. (See page 72)
• Automatic connection setting (See page 51)
※1
• In the following situations, connections other than [U] are not possible.
- Not logged in with Administrator authority
- When using Windows Vista
• Depending on the computer and wireless LAN card used, Easy Wireless Set Up may not be possible. If this is the case,
the [Network] setting of <Select Access Port> window will be switched to [U] automatically. For details of the connection
procedure, first close Wireless Manager ME 4.5, and then refer to pages 23 - 27.
※2
• The initial network number for both the projector and Wireless Manager ME 4.5 is [1]. These numbers must match for the
connection. To check the network number, refer to the network menu of the projector.
• Although WEP (Wired Equivalent Privacy)
network numbers [2] through [4], so set [2] through [4] if security is to be emphasized.
• Important video/audio data is protected because AES
even if [ENCRYPTION] is set to [NONE].
• Other network adapters may not be usable under Easy Wireless Set Up connections.
• Connections to other networks connected through the wireless LAN card are broken under Easy Wireless Set Up
connections.
※ "Glossary" (See page 71)
(cont.)
See page 33)
※ is not set for network number [1], WEP (Wired Equivalent Privacy)
※ encryption processing takes place in advance for all network numbers,
19
※ is set for