Panasonic PT-F200 Network Manual page 42

Various projection methods
Check the status indication on the launcher to make sure that transmission is
6
possible (check that the green lamp is lit).
Click [ ] on the launcher.
7
The projectors selected in step 5 will begin displaying.
• Projectors in the same network are selectable.
• When one of the selected projectors is communicating with another computer, or its projection screen is not set to full screen
display, the images are projected onto the other selected projectors.
• The greater the number of projectors, the slower the transmission.
• Picture quality or other options can be set on the <Option> window by clicking [
• Sound cannot be output in the multiple source live mode.
• If the connection error occurs during projection, the message [Stop "Live mode"] will appear, then restart projection by clicking
launcher buttons.
• Set the [LIVE MODE CUT IN] of the unit to [ON] in advance to enable a different computer to interrupt and project images in
live mode. (See page 58)
Quitting multiple source live mode
Click [ ] on the launcher again.
(cont.)
42
] on the launcher.