Setting Up The Scanner; Setting And Removing The Feed Tray - Panasonic Camescope KV-S1020C Operating Instructions Manual

Setting up the Scanner

Setting and removing the feed tray

Before using the scanner, follow the steps below to set the feed tray.
1
Adjust the document guides to the
width of A5 paper (
feed tray into the scanner (
shown in the illustration.
2
Push the right (
sides of the feed tray in that order until
the feed tray locks in place.
When removing the feed tray, lift it up
to unlock, and then pull the left (
and right (
A
scanner in that order.
3
Pull out the feed tray extension in the
direction of the arrow shown in the
illustration.
10
), and insert the
A
) as
B
) and left ( )
A
B
B
) sides out of the
)
A
B
A
B