Load From Usb; Save To Usb - Toro EVOLUTION Series Quick Start Manual

Load From USB

Load from USB function is used to retrieve schedules saved in a USB Flash drive.
Note: Although many USB flash drives may function well with the EVOLUTION
•
USB Version 2.0 Compliant
•
1–8 GB Memory Size (Smaller memory size will perform faster.)
•
FAT32 File System with 1 Logical Partition
Step 1 – Plug your USB Flash drive into the EVOLUTION
Step 2 – Press the
Step 3 – Use the Up
The EVOLUTION
to the desired schedule. Use the Right
Step 4 – Use the Up
Step 5 – After the controller states Success, press the BACK

Save to USB

Save to USB is used to save all the schedules that are programmed in the controller so it can be reloaded if accidentally erased. The Save to USB function is
also helpful when loading multiple controllers with the same schedule programs.
Note: Although many USB flash drives may function well with the EVOLUTION
•
USB Version 2.0 Compliant
•
1–8 GB Memory Size (Smaller memory size will perform faster.)
•
FAT32 File System with 1 Logical Partition
Step 1 – Plug your USB Flash drive into the EVOLUTION
See Figure 2 on page 2.
Step 2 – Press the
Step 3 – Use the Up
20
HELP/SETUP button.
or Down arrows to navigate to LOAD FROM USB. Press SELECT
controller will list all available schedule files. Use the Up
®
arrow or SELECT
or Down arrow to select YES from the confirmation window.
HELP/SETUP button.
or Down arrows to navigate to SAVE TO USB. Press SELECT
controller, the following USB specifications are recommended:
®
USB port located at the back of the control panel. See Figure 2 on page 2.
®
to load the schedule.
arrow to return to the previous menu or
controller, the following USB specifications are recommended:
®
USB port located at the back of the control panel.
®
.
or Down arrows to navigate
HOME to return to the main screen.
.
HELP/SETUP
ALERTS
CONTACT TORO
SET TIME/DATE
LOAD FROM USB
SAVE TO USB
LOAD FROM USB
ARE YOU SURE? YES
HELP/SETUP
ALERTS
CONTACT TORO
SET TIME/DATE
LOAD FROM USB
SAVE TO USB