Schedule Start Setup - Toro EVOLUTION Series Quick Start Manual

Hide thumbs Also See for EVOLUTION Series:

Manual (96 pages)

User manual (30 pages)

Quick start manual (8 pages)

Table Of Contents

Table of Contents

(ODD Option) Selecting ODD schedule will set the odd numbered days of the calendar as the watering days.

(EVEN Option) Selecting EVEN schedule will set the even numbered days of the calendar as the watering days.

(INTERVAL Option) Selecting INTERVAL allows you to set the interval days between watering cycles. Use the

Left

or Right

day interval between watering cycles, then press SELECT

Right

arrow to navigate to the CURRENT DAY parameter. Use the Up

current day designation, then press SELECT

Step 6 – Press the BACK

Schedule Start Setup

By default, the EVOLUTION

controller is set with 1 start time set to OFF. Additional Starts can be added with a maximum of four starts per schedule. Once a

start is activated, the schedule will activate the first zone (lowest number). Once it is complete, the second zone will water. The schedule will continue until all

zones with runtimes have been activated.

Step 1 – Press the

SCHEDULES button.

Step 2 – (For controllers with multiple active schedules only.)

Use the Up

or Down

Note: The Schedule name can be customized using the EVOLUTION

toro.com/evolution.

Step 3 – Use the Up

or Down

Step 4 – Use the Left

or Right

your desired start time. Press SELECT

Step 5 – Navigate to ADD START to add another start time. Press SELECT

Step 6 – To delete a start time, set the time to OFF. The OFF selection is located between the full hour of 11:00 AM/PM and the full hour of 12:00 AM/

PM (23:00 and 00:00).

Step 7 – Press the BACK

arrows to navigate to WATER EVERY. Use the Up

arrow to return to the previous menu or

arrows to select the Schedule you want to edit. Press SELECT

arrows to navigate to SCHEDULE STARTS. Press SELECT

arrows to navigate to the start time's Hours, Minutes and AM/PM. Use the Up

to save.

arrow to return to the previous menu or

or Down

arrows to set the desired

. While in the CURRENT DAY selection, press the