Dell OptiPlex Micro Plus 7010 Owner's Manual page 85

Table 33. System setup options—Power menu
Power
USB Wake Support
Enable USB Wake Support
AC Behavior
AC Recovery
Active State Power Management
Aspm
Block Sleep
Deep Sleep Control
Fan Control Override
Intel Speed Shift Technology
Table 34. System setup options—Security menu
Security
TPM 2.0 Security
TPM 2.0 Security On
Attestation Enable
Key Storage Enable
SHA-256
Clear
PPI ByPass for Clear Commands
Chassis intrusion
When enabled, you can use the USB devices like a mouse or keyboard to wake
your computer from standby.
By default, the option is enabled.
Enables the system to turn on automatically, when AC is inserted.
By default, the Power Off option is enabled.
Enables or disables the Active State Power Management (ASPM) level
By default, the Auto option is enabled.
Enables to block entering sleep (S3) mode in the operating system.
By default, the Block Sleep option is disabled.
Enable or disable the Deep Sleep mode support.
By default, the Disabled option is enabled.
Enable or disable the fan control override feature.
By default, the option is disabled.
Enable or disable the Intel speed shift technology support.
By default, the Intel Speed Shift Technology option is enabled.
Enable or disable TPM 2.0 security options.
By default, the TPM 2.0 Security On option is enabled.
Enables to control whether the Trusted Platform Module (TPM) Endorsement
Hierarchy is available to the operating system.
By default, the Attestation Enable option is enabled.
Enables to control whether the Trusted Platform Module (TPM) Storage
Hierarchy is available to the operating system.
By default, the Key Storage Enable option is enabled.
BIOS and the TPM will use the SHA-256 hash algorithm to extend
measurements into the TPM PCRs during BIOS boot.
By default, the SHA-256 option is enabled.
Enables to clear the TPM owner information and returns the TPM to the
default state.
By default, the Clear option is disabled.
Controls the TPM Physical Presence Interface (PPI).
By default, the PPI ByPass for clear Commands option is disabled.
Controls the chassis intrusion feature.
By default, the option is disabled.
BIOS setup 85