Page 1
8500 series User manual 用户手册 Please read this instructions carefully before using the appliance. 使用产品前请仔细阅读本使用说明书 。 Please keep this instruction book for future reference. 保留备用 。...
Page 8
The appliance is suitable to be used with tap water. However, if you live in an area with hard water, we recommend that you mix an equal amount of tap water with distilled or demineralized water. This will prevent fast scale build up and prolong the lifetime of the appliance. 本产品可使用自来水。但如果您居住的区域水质较硬,我们建议您将等量的自来水 与蒸馏水或软化水混合使用。这样可以防止水垢快速积聚,从而延长产品的使用 寿命。 www.philips.com/welcome...
Page 9
~90 秒 Press steam trigger for 10s before ironing to prevent water stains on garment. 熨烫前,按下蒸汽开关 10 秒钟,防止在衣物上产生水渍。 www.philips.com/welcome...
Page 17
If you have any problems, visit www.philips.com/support for a list of frequently asked questions or contact the Consumer Care Center in your country. Problem Possible cause Solution The appliance produces no The steamer has not heated Let the appliance heat up for 90 seconds.
Page 18
10 seconds to release the initial gush of water droplets. For stain on garment, rinse off any stains under running water. For stain on steamer head, wipe any deposits off the steamer head with a damp cloth. www.philips.com/welcome...
Page 19
The board is too high for Pole height is not adjusted Lower the pole height when ironing me at horizontal position. when changing from vertical/tilt horizontally. Refer to position to horizontal position. 如果您有任何问题,请访问 www.philips.com/support 查阅常见问题列表,或联 系您所在国家/地区的客户服务中心。 问题 可能的原因 解决方法 让产品加热 90 秒钟。当产品可供使 产品无法产生...