Panasonic BT-LH1710W Specifications page 6

Useful Display Functions for Professional Use
Various Markers
4:3 Aspect Marker
Safe Area and Center Marker
4:3 Aspect and Safe Area Marker
(BT-LH2550/LH1760/LH1710/LH80WU)
Cross Hatch Overlay
Waveform Monitoring
Vectorscope Display
HV Delay Display and Mono Mode
The HV Delay function that displays the video blanking period, and
the Mono mode that switches the display to black-and-white can
be assigned to function keys for quick access.
*1: LH900A: not assignable on function keys (need to be set on menu).
*2: LH80WU: Mono Mode only.
[2550] [1760] [1710] [900A] [80WU]
Various markers can be
displayed in both 16:9 and 4:3
aspect ratios.
• Aspect Marker (16:9):
4:3, 13:9, 14:9, CNSCO or VISTA,
with background brightness
control of Black (0%), Half (50%)
or Normal (100%).
• Safe Area Marker (16:9/4:3):
95%, 93%, 90%, 88% or 80%.
In 16:9 mode, the BT-LH2550/
LH1760/LH1710/LH80WU can
display a superimposed safe
area marker corresponding to
the aspect marker's angle of
view.
• Center Marker (16:9/4:3):
ON/OFF. The center marker can
be displayed together with
another marker, as shown in the
example on the left.
[2550] [1760] [1710] [80WU]
A simple cross hatch overlay can
be displayed (at 120* dots
interval, fixed) to check the tilt of
the camera. You can also
allocate the cross hatch function
to any of the three function keys.
*80 dots for the BT-LH1760/LH1710,
50 dots for the BT-LH80WU.
[2550] [1760] [1710] [900A] [80WU]
All lines of the input signal is
displayed as a waveform for
monitoring. The BT-LH2550/
LH1760/LH1710 waveform
display can be positioned in any
of the four corners of the screen.
The BT-LH900A/LH80WU
waveform is displayed in the
lower right portion of the screen.
[2550] [1760] [1710]
All lines of the input signal is
displayed as a vectorscope, and
can be positioned in any of the
four corners of the screen.
[2550] [1760] [1710] [900A* ] [80WU*
1
Pixel-to-Pixel Display
center, right-top, right-bottom, left-top or left-bottom. In the
BT-LH80WU, this function facilitates focusing. With 1080/60i input
signals, you can check the focus with a screen width equivalent to
19 inches.
Coordination of Multiple Cameras on Split Screens
earlier time or with a different camera. There are two display
modes: FULL for displaying and comparing the entire image on the
screen, and PART for displaying and comparing only the center
part of the images. (FULL-only on LH2550)
Audio Level Meter Overlay
Time Code Display Function
Closed Caption Function
Cine Gamma Compensation
Equipped with a cine-gamma (F-REC) compensation function for
compatibility as a monitor for the Varicam AJ-HDC27H Camcorder.
This function supports the production of movies, film-like HDTV
programs, and TV commercials.
]
2
Focus-in-Red Function for HD Shooting
OFF Image ON Image
[1760] [1710] [80WU]
This function lets you display
and confirm video pixels input in
HD-SDI without any resizing.
In the BT-LH1760/LH1710, this
function is useful for image
confirmation. When using 1080i,
choose from five display areas:
[2550] [1760] [1710]
A frame of video can easily be
frozen and displayed as a still
image on the left side of the
screen. This function can be
used to match a live camera with
a frame of video shot at an
[2550] [1760] [1710]
The BT-LH2550/LH1760/LH1710
come with an audio embedded
function. In addition, the
SDI-input audio level can be
displayed on the screen with a
white skeleton bar meter. Choose
from 2-channel/4-channel/
8-channel/OFF for the display.
[2550] [1760] [1710]
With HD-SDI input, this function
displays the value of the VITC,
LTC or UB time code, depending
on which one has been selected.
[2550] [1760] [1710]
When an NTSC video signal is
input, this function can display
close captions (32 characters x
15 lines). The display mode can
be selected from CC1, CC2,
CC3 or CC4.
[2550] [1760] [1710] [900A]
[80WU]
This function emphasizes the
sharply focused area of the
image by showing it in an easily
visible red, making it easier to
focus the HD camera.