Time Interval (M-Mode And Doppler); Erasing Measurements - GE TiP LOGIQ 400 Quick Start Manual

Time Interval
(M-Mode and Doppler)
Perform a time interval measurement for calculations such as HR, PHT and ET.
Press Measurement twice in M-Mode and four times in Doppler. A "
lines appears when the cursor is in the M-Mode timeline/Doppler spectrum.
Use the Trackball to move the cursor to the measurement start point. Press Set to fix the first
cursor.
Use the Trackball to move the second cursor to the measurement end point. Press Set to complete
the measurement.
The time interval between the two cursors is displayed.

Erasing Measurements

Pressing Clear or unfreezing the image erases all measurements and calculations on the display.
Measurements and calculations, however, remain on the report pages.
Pressing New Patient erases all measurements and calculations on the display and clears the
report pages.
Rotating the Cine Scroll control erases measurements.
Adding a new measurement that exceeds the maximum number of allowable measurements erases
the first or oldest measurement.
Quick Start 36
All manuals and user guides at all-guides.com

" cursor with vertical dotted
t
LOGIQ 400 Quick Start Guide
2237879–100 Rev. 0