NEC DTERM 2400 PBX User Manual

Internal Calls...................................
Local Calls ....................................
Long Distance ...............................
SPKR BUTTON
Allows you to have a conversation, without lifting
handset
*Use with Caution
HOLD
1. You have a caller on the line
2. Press HOLD (See flashing line)
3. To return to call press into the flashing line to
reconnect caller
NOTE: If you leave the call on hold too long, the
system will remind you with a recall ring
TRANSFER
Transfer one line to another
1. You have caller on the line
2. Press TRF (transfer), hear stutter dial tone
3. Dial extension number, wait for answer
4. Announce call privately, hang up
5. If unable to transfer because busy, no answer or
dialing error, press TRF again to return to caller
Note: If Voice Mail answers and you want to
disconnect, press *0
CALL FORWARD ALL CALLS
1. Get Dial Tone
2. Dial *3 or press FWD (forward) key
3. Enter suitable extension, FWD light will stay on
4. To cancel, lift handset, press FWD key, or **3
CALL FORWARD BUSY
1. Get Dial tone
2. Dial *8, or press FWD BY
3. Enter extension, FWD BY light will stay on
4. To cancel, lift handset, press FWD BY key, or
**8
Telephone User Guide
NEC – DTERM SERIES E
For NEC 2400 PBX
Dial the 4 digit extension number
Dial 9 + number
Dial 9 + 1 + area code + number
LAST NUMBER REDIAL
Your last 5 numbers can be dialed automatically
1. Press REDIAL, last number dialed is displayed
2. Press REDIAL until desired number is displayed
3. Press the * key and the number is dialed
EXCLUSIVE HOLD
Can be retrieved only from your set
1. You have a caller on the line
2. Press HOLD key twice
3. Return to caller . . . press the flashing line
*Caution: pressing the hold too hard will place the
call on Exclusive Hold
CONFERENCE CALL
Allows three parties on the line
1. You have caller on line
2. Press TRF, hear stutter dial tone
3. Dial the number to be added (internal/external)
4. Press CONF to join all three parties
Note: If you are the only internal party and you
hang up, the conference call will end.
CALL FORWARD NO ANSWER
1. Get Dial tone
2. Dial *6, or press FWD NA
3. Enter extension, FWD NA light will stay on
4. To cancel, lift handset, press FWD NA key, or
**6
VOICE CALL
1. Dial extension number
2. When ringing starts, press VOICE
3. Speak to user on other end
Note: When receiving a voice call, there is no need