Description
3.4 Device/module identification
Information on handling cable glands
Cable glands on the field control unit are secured in the factory against the ingress of undesired
particles by means of three inserts of different sizes. Observe the following specifications:
• Keep the inserts even after you have connected the device
• If you no longer need a connection, block the cable bushing again with the appropriate insert.
①
②
③
④
⑤
⑥
Figure 3-5
3.4
Device/module identification
3.4.1
Field control unit rating plate
The rating plate with the order number and other important information is located on the left
side of the Ex-d enclosure of the field control unit.
18
Cable bushing on device side
Insert
Union nut
Insert ID06
Insert ID04
Insert ID02
Inserts for securing cable bushings on the field device
Operating Instructions, 05/2022, A5E35640463-07
Field device