Change And Save Settings Using The Web; Basic Network Settings Page - Bosch B426 Installation And Operation Manual

Conettix Ethernet Communication
Module
5.6

Change and save settings using the web

The settings for the module are grouped by topic in the left column of the web interface in the
module menu structure.
Some settings (menu options) might be unavailable if:
–
–
–
Saving settings using the Web
To preserve edited values, click the OK button on each page before navigating to a different
setting page (menu).
To save all edited values and apply them to the module, click the Save and Execute link.
5.7

Basic Network Settings page

The Basic Network Settings page disables different options, depending on whether IPv6
mode is enabled or disabled.
Figure 5.3: Basic Network Settings default web page
IPv4 DHCP/AutoIP Enable
Default: Yes
Selections: Yes, No
Yes: DHCP /AutoIP is enabled.
No: DHCP/AutoIP is disabled.
DHCP is an auto configuration protocol that allows a computer to be automatically configured,
which eliminates the need for interaction by a network administrator. DHCP also provides a
central database that tracks computers that connect to the network, which prevents two
computers from accidentally being configured with the same IP address.
AutoIP enables dynamic IP addresses to be assigned to a device when the device is started up.
Whereas DHCP requires a DHCP server, AutoIP does not require a server when selecting an IP
address. A host configured with AutoIP receives an IP address of 169.254.xxx.xxx.
Bosch Security Systems, Inc.
The setting conflicts with another configured setting (for example, the Static IP setting is
unavailable when DHCP is enabled).
The setting conflicts with the address setting (for example, the Panel Address setting is
read-only if the address switch is set to anything but 0).
The setting is unavailable in the current product release.
Installation and Operation Guide (UL)
Configuration | en 17
2013.08 | 02 | F.01U.281.208